Abstract:Nuclear magnetic resonance (NMR) experiments on subnanoliter (sub-nL) volumes are hindered by the limited sensitivity of the detector and the difficulties in positioning and holding such small samples in proximity of the detector. In this work, we report on NMR experiments on liquid and biological entities immersed in liquids having volumes down to 100 pL. These measurements are enabled by the fabrication of high spatial resolution 3D printed microfluidic structures, specifically conceived to guide and confine sub-nL samples in the sub-nL most sensitive volume of a single-chip integrated NMR probe. The microfluidic structures are fabricated using a two-photon polymerization 3D printing technique having a resolution better than 1 μm3. The high spatial resolution 3D printing approach adopted here allows to rapidly fabricate complex microfluidic structures tailored to position, hold, and feed biological samples, with a design that maximizes the NMR signals amplitude and minimizes the static magnetic field inhomogeneities. The layer separating the sample from the microcoil, crucial to exploit the volume of maximum sensitivity of the detector, has a thickness of 10 μm. To demonstrate the potential of this approach, we report NMR experiments on sub-nL intact biological entities in liquid media, specifically ova of the tardigrade Richtersius coronifer and sections of Caenorhabditis elegans nematodes. We show a sensitivity of 2.5x1013 spins/Hz1/2 on 1H nuclei at 7 T, sufficient to detect 6 pmol of 1H nuclei of endogenous compounds in active volumes down to 100 pL and in a measurement time of 3 hours. Spectral resolutions of 0.01 ppm in liquid samples and of 0.1 ppm in the investigated biological entities are also demonstrated. The obtained results may indicate a route for NMR studies at the single unit level of important biological entities having sub-nL volumes, such as living microscopic organisms and eggs of several mammalians, humans included.

Small NMR biomolecular sensors

Silicon RF NMR Biomolecular Sensor - Review

Handheld NMR Systems and Their Applications for Biomolecular Sensing

A Broadband NMR Magnetometer System with Field Searching and Automatic Tuning Function

CMOS Mini Nuclear Magnetic Resonance System and its Application for Biomolecular Sensing.

Palm NMR and 1-Chip NMR.

CMOS RF Biosensor Utilizing Nuclear Magnetic Resonance

Scalable NMR Spectroscopy with Semiconductor Chips.

Palm NMR and One-Chip NMR

Next‐generation Multidimensional NMR Spectrometer Based on Semiconductor Technology

Multinuclear nanoliter one-dimensional and two-dimensional NMR spectroscopy with a single non-resonant microcoil

A Portable Chip-Based NMR Relaxometry System With Arbitrary Phase Control for Point-of-Care Blood Analysis

A Novel Raman Spectrum Detection System Based on an Integrated Optical Biosensor

International Solid-State Circuits Conference ISSCC 2010 / SESSION 27 / DIRECTIONS IN HEALTH , ENERGY & RF / 27 . 2 27 . 2 Palm NMR and One-Chip NMR

Mobile low field magnetic resonance hardware development

A miniaturized microfluidic nanoplasmonic sensor with cavity reflection enhancement for ultrasensitive molecular interaction analysis

Dynamic single-molecule sensing via nanoparticle micromanipulation for rapid and ultrasensitive biomarker detection

Dynamic single-molecule sensing by actively tuning binding kinetics for ultrasensitive biomarker detection

3D printed microchannels for sub-nL NMR spectroscopy

-NMR at the point of care testing

A mobile one-sided NMR sensor with a homogeneous magnetic field: the NMR-MOLE