Abstract:One of the core requirements for the further maturity in microfluidics is to develop a fluid actuation method in bubble-free and power-efficient manner. Although kinds of active and passive fluid control techniques have been described over the past several decades, complex microfluidic systems still require bulky or energy-inefficient actuation components and simpler systems lack the functionality required for a simple field diagnostic test. Here a novel microfluidic pumping strategy is reported which utilizes the high air permeability of silicone materials to actuate fluid flow, named as Microfluidic Sample Isolated Pumping (μSIP). The key elements of μSIP are two channel networks, the fluidic channel and the degas channel, isolated by selective barriers and located in close proximity to each other. The selective barriers allow gas to pass through while being inaccessible for aqueous liquids due to low surface energy of the porous material. An air concentration gradient across the two networks generates an in-situ diffusive flux out of the fluidic channel. It results in fluidic channel pressure reduction which drives the liquid solution into the fluidic channel while the solution being kept isolated from the surrounding degas channels by the selective barrier. To understand the physics behind μSIP, theoretical analysis and experimental characterizations were performed, the experimental data could be well illustrated and predicted by the developed theories and also average flow velocities in the range of 0.7 to 7 mm/s were observed with the current designs. The μSIP provides tunable, reproducible, and bubble-free microfluidic pumping without any auxiliary equipment or device pre-treatment, providing a powerful liquid handling tool for a broad range of applications.

External-integrated biomimetic micropump for microfluidic system

A Microfluidic Pump/Valve Inspired by Xylem Embolism and Transpiration in Plants

A Micropump Based on Water Potential Difference in Plants

A bio-inspired micropump based on stomatal transpiration in plants.

Enhanced capillary pumping through evaporation assisted leaf-mimicking micropumps

Evaporation characteristics of micropores in biomimetic micropump

A Minimized Valveless Electromagnetic Micropump for Microfluidic Actuation on Organ Chips

Chip-integrated non-mechanical microfluidic pump driven by electrowetting on dielectrics

Characterization of Leaf-Inspired Microfluidic Chips for Pumpless Fluid Transport

A Self-Regulated Microfluidic Device with Thermal Bubble Micropumps

A Hydrostatic Pressure-Driven Passive Micropump Enhanced with Siphon-Based Autofill Function.

A Controllable and Integrated Pump-enabled Microfluidic Chip and Its Application in Droplets Generating.

A self-priming microfluidic diaphragm pump capable of recirculation fabricated by combining soft lithography and traditional machining

Microfluidic Solution Isolated Pumping (Μsip)

Piezoelectric Peristaltic Micropump Integrated on a Microfluidic Chip

High Performance Electromagnetic Micropump with Bio-Inspired Synchronous Valves for Integrated Microfluidics

Biomimetic Inner Helicoidal Microfluidics with Enhanced Capillary Rise for Step Liquid Lifting Mimicking Transpiration

An Osmotic Micro-Pump Integrated on a Microfluidic Chip for Perfusion Cell Culture

Hand-powered microfluidics: A membrane pump with a patient-to-chip syringe interface

A Novel Integrated Pzt-Driven Micropump and Microvalve

A Smart Active Phase-Change Micropump Based on CMOS-MEMS Technology