Abstract:This study investigated the structural progressive collapse using finite element (FE) and theoretical methods. Firstly, an FE model was established based on the component method and layered shell element method. The reliability of modeling approaches was evaluated by comparing them with the previous experimental tests by the author. The NIST building was taken as an example to investigate the structural collapse behavior and the failure modes after different component failure scenarios including single column, double columns, multiple columns, and horizontal components based on the alternative path method. The results indicated that the failure of gravity columns and joints more easily triggered the progressive collapse of the structure. After the failure of double moment-resisting frame columns, the structure still demonstrated considerable robustness. The impact of floor fragments played a controlling role in the process of collapse propagation. A method for achieving rapid collapse of structures was proposed based on the structural collapse characteristics. The study found that a demolition strategy based on gravity columns can facilitate the rapid collapse of structures. After comparing the different simplified modeling methods, it was revealed that the 2D models underestimated the anti-collapse performance of structures compared to the 3D models. Under the same scenarios, the predicted structural collapse response of the 2D model was several times greater than that of the 3D model (up to 7 times). Meanwhile, the structural collapse occurred earlier in the 2D model. The anti-collapse performance of structures adopting different design codes also was compared. It was revealed that GSA 2016 has put forward requirements for higher collapse resistance of buildings. In this study, a new calculation method was proposed, namely the Collapse Probability Prediction Method Based on the Randomness of Structural Load (CPPM-RSL). In the CPPM-RSL, load reliability theory was employed to ensure that the structural collapse resistance design fell within the realm of structural engineering theory. Meanwhile, the CPPM-RSL offered greater engineering interpretability compared to previous methods. Additionally, a new simplified mechanical model was proposed to predict the collapse resistance of structures. The new simplified model did not depend on the computational results obtained from the finite element method (FEM) unlike the existing model. At the same time, the simplified method also exhibited high reliability as revealed by comparisons with the FEM. To solve highly nonlinear problems, machine learning (ML) algorithms were established to predict the anti-collapse performance and the collapse probability of structures based on the proposed theoretical model. Meanwhile, the applicability and performance of the multiple ML algorithms in estimating the structural collapse behavior were compared and evaluated. The results indicated that the LightGBM model exhibited stronger robustness and predictive ability.

Progressive Collapse Analysis of 20-Storey Building Considering Composite Action of Floor Slab

Numerical Simulation and Design of Progressive Collapse of Steel Frame Composite Structures Considering Falling-Floors Impact

Theoretical evaluation method for the progressive collapse resistance of steel frame buildings

14.05: A mehcanical model of composite floor systems under internal column-removal scenarios

Quantitative analysis of extra load-carrying mechanisms to prevent progressive collapse of reinforced concrete buildings

Experimental and Analytical Study on Progressive Collapse of 3D Composite Floor System under Corner Column Loss

Vertical Progressive Collapse of Composite Floor Systems under a Side Column Removal Scenario: Experimental and Numerical Investigations

Nonlinear dynamic analysis on progressive collapse resistance of a multi-story reinforced concrete building with slab

Experimental study and numerical analysis of progressive collapse resistance of composite frames

Study on Progressive Collapse of Overall Structure Based on Numerical Simulation Method and Prediction of Structural Collapse

Preliminary Study on Dynamic Progressive Collapse Analysis of Spatial Composite Frames with Concrete-Filled Steel Tubular Columns

Progressive Collapse of 3D Composite Floor Systems with Rigid Connections under External Column Removal Scenarios

Progressive Collapse Mechanism Analysis On Spatial Composite Frame With Cfst Columns Based On Abaqus Parametric Modeling

Progressive Collapse Nonlinear Analysis on Composite Frames with CFST Columns Based on Static-dynamic Analytic Conversion Procedure in Fires

Component tests and numerical simulations of composite floor systems under progressive collapse

Numerical investigation on progressive collapse resistance of steel-concrete composite floor systems

Numerical Study on Collapse-Resistant Performance of Multi-Story Composite Frames under a Column Removal Scenario

NONLINEAR DYNAMIC PROGRESSIVE COLLAPSE ANALYSIS OF COMPOSITE FRAMES WITH CONCRETE-FILLED STEEL TUBULAR COLUMNS BASED ON FIBER MODEL

Simplified Multi-Scale Simulation Investigation of 3D Composite Floor Substructures under Different Column-Removal Scenarios

Progressive Collapse Analysis of Reinforced Concrete Multistoried Frame Structure

Progressive collapse performance analysis of concrete-filled square steel tubular column to composite beam with outer ring plate connection