Abstract:With the progress in metallurgical technique and steel production process, the strength of structural steels can be improved, along with other material properties, including higher toughness and better weldability. Meanwhile, there are numerous potential civil structural applications for high strength steel (HSS), such as large-span space frames, transfer truss in high-rise buildings, as well as truss bridges. The mechanical behavior of structural members made up from HSS must be closely investigated and quantified before HSS can be widely used in engineering structures. In this paper experiments on six Q550 HSS I-section beams under moment gradient (MG) and four Q550 HSS I-section beams under patch loading (PL) were carried out, to investigate the local buckling behavior of I-section beams subjected to different loading conditions. The failure modes, critical local buckling strengths, ultimate strengths, load–deformation curves, load–strain curves and moment–rotation curves of the specimens were obtained. The test results of ultimate strengths were further compared with the design results in accordance with the available design methods in current specifications, ANSI/AISC 360-16, Eurocode 3, AS 4100-1998, AIJ LSD 2010 and GB 50017-2003. Accounting for material nonlinearity, geometric imperfection and residual stress, finite element models were established and verified with the existing test results, which were used for the parametric analysis of two series of 240 beams. The parametric investigation focused on the effects of the material properties and component plate slenderness on the ultimate strengths of I-section beams under MG and the ones under PL. The comparisons between the parametric analysis results, test results and the design results from ANSI/AISC 360-16 and Eurocode 3 were also conducted.

Experimental study of lateral-torsional buckling behavior of stainless steel welded I-section beams

Experimental Study on Lateral Buckling Behavior of Stainless Steel Beams with Welded I-sections

Analysis on overall buckling behavior of stainless steel welded I-beams and design methods

A RESTUDY ON STABILITY OF STEEL BEAMS:INTERNATIONAL TESTS AND THEORETICAL ANALYSES(Ⅱ)

Analysis on Overall Stability of Stainless Steel Beams with Welded I-Section

Experimental Study on the Deformation Behavior of Symmetric Stainless Steel I-Beams

Experimental research on stainless steel welded I-section beam-columns

Global Buckling of S35657 Austenitic Stainless Steel Welded Box- and I-section Long Columns under Axial Compression

Experimental and Analytical Study on Local Buckling Behavior of High Strength Steel Welded I-Section Beams

Experimental and numerical investigation on flexural-torsional buckling of Q460 steel beams

INFLUENCES OF RESIDUAL STRESS ON INELASTIC LATERAL-TORSIONAL BUCKLING OF WELDED I-BEAMS

Local–overall Interactive Buckling Behaviour of Welded Stainless Steel I-section Columns

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Numerical analysis of overall stability of unbraced stainless steel simply-supported beams with fabricated I-section

Two Calculation Methods for Buckling Reduction Factors of Stainless Steel Welded I-Section Beams

Flexural Buckling Behavior of Welded Stainless Steel Box-Section Columns

Experimental and Numerical Study on Lateral-Torsional Buckling Behavior of High Performance Steel Beams

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

Experimental and numerical investigation on Local-Overall interactive buckling behavior of welded I-Section steel columns

Local buckling behavior of high strength steel welded I-section flexural members under uniform moment:

Stainless steel lipped C-section beams: Numerical modelling and development of design rules