Abstract:Using molecular dynamics (MD) simulation, the influence of crystallographic orientation on the mechanical properties and microstructure evolution of the single-crystal CoCrFeMnNi high-entropy alloy as a face-centered cubic (FCC) metal is explored and quantified by nanoindentation. At the elastic stage of P-h curve, the results of MD-simulation are almost consistent with that of Hertz contact theory fitting, which ensures the accuracy of our results. The plastic deformation is studied by correlating the P-h curve with the instantaneous defect structure, and dominated by nucleation of Shockley partial dislocations or the movements of stacking faults. Furthermore, we discuss the effects of crystallographic orientations[001],[110], and [111] on the mechanical response of materials and the microstructure evolution. The slip mode and the stress-concentrated region are controlled by the crystallographic orientations, and an obvious pop-in behaviors are viewed in [111]-oriented sample, without appearing in other samples. The microstructure evolution exhibits distinct anisotropy causing the discrepancy of dislocation density and hardness. By analyzing the evolution of dislocation density and hardness, the linear relationship between the square root of dislocations density and hardness is revealed, and in good agreement with the classic Taylor hardening expression where the pre-factor is strongly dependent on the crystallographic orientation. In the study, the atomistic results are consistent with those predicted by the classic continuum mechanical theory, which contributes to the application of classic mechanical theory in molecular dynamics simulation.

Effects of Chromium Addition on Fracture Toughness and Hardness of Oriented Bulk Fe2b Crystals

Microstructure,mechanical Properties and Toughening Mechanism of Directional Fe2B Crystal in Fe-B Alloy with Trace Cr Addition

Effect of Molybdenum Addition on Mechanical Properties of Oriented Bulk Fe2B Crystal

Friction and Wear Properties of Oriented Fe2B with Different Cr Additions under Water-Lubricated Condition

Effects of Chromium on the Morphology and Mechanical Properties of Fe2B Intermetallic in Fe-3.0B Alloy

Improving Fracture Toughness and Hardness of Fe2B in High Boron White Cast Iron by Chromium Addition

Solidification Process, Microstructure, and Mechanical Properties of Cr-doped High Boron Fe-based Alloy

Investigations on the Mechanical Properties and Three-Body Wear Behavior of Pure Fe2B Intermetallic with Different Chromium Additions

Microstructure Evolution and Mechanical Properties of Fe–Cr–B Alloys with Varying Mo Additions

Influence of Cr Addition on Tribological Properties of Bulk Fe2B under Dry Friction and Water Lubrication

Effect of improving Fe2B toughness by chromium addition on the two-body abrasive wear behavior of Fe–3.0 wt% B cast alloy

Effect of Chromium-Induced (fe, Cr)3C Toughness Improvement on the Two-Body Abrasive Wear Behaviors of White Cast Iron

Effects of Chromium Addition on Preparation and Properties of Bulk Cementite

Effect of Cr on solidification structure and microhardness of Al-Ni alloy

Effect of Crystal Orientation on Microstructure and Properties of Bulk Fe2b Intermetallic

Effect of different chromium contents on microstructure and two-body abrasive wear behavior of Fe-Mn-B surfacing alloys

Effect Of Molybdenum Addition On Fracture Toughness And Hardness Of Fe2b In Fe-B-C Cast Alloy

Effect of Chromium Content on Microstructure, Hardness, and Wear Resistance of As-Cast Fe-Cr-B Alloy

Effect of Tungsten Addition on the Toughness and Hardness of Fe2B in Wear-Resistant Fe–B–C Cast Alloy

Effects of Titanium Addition on the Microstructural and Mechanical Property Evolution of FeCrB Alloys

Effect of crystallographic orientation on mechanical properties of single-crystal CoCrFeMnNi high-entropy alloy