Abstract:A numerical model is presented to reproduce the stress induced fracturing process of brittle rocks. Material heterogeneity at the zone level of the model is considered, and distinct initial microcrack lengths and orientations are also included. The rock material is prescribed with a Weibull distribution, and the microcrack lengths and orientations are defined by distinct distribution functions. Stress intensity factor approach is adopted to characterize the stress condition of the microcracks, and is used as a failure criterion for the zones of the model. The mechanical response of rock specimens is investigated on models under different external loading conditions. Obvious nonlinear characteristics before the peak strength can be observed in models under uniaxial compression. Consistency can be found between simulation results and lab test data. The influence of microcrack conditions and heterogeneity levels on the simulation result is also investigated. The macroscopic failure modes of models are studied with different distributions of initial microcracks, and correlations are found between the microcrack conditions and fracturing processes. Especially, scattered zones and obscure fracture patterns are produced in the model defined by exponential and uniform distribution, compared with clear shapes of macroscopic fractures observed in models defined by normal or lognormal distributions. The simulations also show that the differences in the mean value of microcrack orientations obeying certain distribution result in distinct macroscopic fracture patterns, from shear bands at lower mean orientations to tensile fractures at higher mean orientations. Typical fracture patterns observed in laboratory are successfully reproduced in the model, which demonstrates the capability of the model in reproducing faithful rock behaviors through prescribing specific microscopic characteristics.

Characterizing Brittle Fracture by Modeling Crack Deflection Angles from the Microstructure

Dynamic Fracture in Brittle Solids at High Rates of Loading

Modelling the Failure Behaviour of Brittle or Quasi-Brittle Materials by Analysing the Growth of Micro-Cracks

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

A Numerical Study of Brittle Failure in Rocks with Distinct Microcrack Characteristics

Thermo-gaseous-mechanical coupling phase-field model for brittle crack propagation in tungsten

Complexity of crack front geometry enhances toughness of brittle solids

A Length Scale Insensitive Phase-Field Damage Model for Brittle Fracture

A Micro-Macro Dynamic Compressive-Shear Fracture Model under Static Confining Pressure in Brittle Rocks

An Analytical Compressive-Shear Fracture Model Influenced by Thermally Treated Microcracks in Brittle Solids

The Microscopic Mechanism of Crack Evolution in Brittle Material Containing 3-D Embedded Flaw

Numerical Simulations of Crack Deflection at A Twist-Misoriented Grain Boundary Between Two Ideally Brittle Crystals

Crack Nucleation in Brittle and Quasi-Brittle Materials: A Peridynamic Analysis

Effects of Crack Inclination on Shear Failure of Brittle Geomaterials under Compression

A New Damage Model for Microcrack-Weakened Brittle Solids

A Modeling Study of the Micro-Cracking Behavior of Brittle Crystalline Rocks under Uniaxial Loading Considering Different Scenarios of Grain-Based Models

Modelling fracture process zone width and length for quasi-brittle fracture of rock, concrete and ceramics

Crack Velocity- and Strain Rate- Dependent Dynamic Compressive Responses in Brittle Solids

A Study on Phase-Field Models for Brittle Fracture

Investigation of microcracking behaviors in brittle rock using polygonal grain‐based distinct method