Abstract:Scanning Laser Doppler Vibrometer (SLDV) measurements are affected by sensor head vibrations as if they are vibrations of the target surface itself. This paper presents practical correction schemes to solve this important problem. The study begins with a theoretical analysis, for arbitrary vibration and any scanning configuration, which shows that the only measurement required is of the vibration velocity at the incident point on the final steering mirror in the direction of the outgoing laser beam and this underpins the two correction options investigated. Correction sensor location is critical; the first scheme uses an accelerometer pair located on the SLDV front panel, either side of the emitted laser beam, while the second uses a single accelerometer located along the optical axis behind the final steering mirror. Initial experiments with a vibrating sensor head and stationary target confirmed the sensitivity to sensor head vibration together with the effectiveness of the correction schemes which reduced overall error by 17 dB (accelerometer pair) and 27 dB (single accelerometer). In extensive further tests with both sensor head and target vibration, conducted across a range of scan angles, the correction schemes reduced error by typically 14 dB (accelerometer pair) and 20 dB (single accelerometer). RMS phase error was also up to 30% lower for the single accelerometer option, confirming it as the preferred option. The theory suggests a geometrical weighting of the correction measurements and this provides a small additional improvement. Since the direction of the outgoing laser beam and its incident point on the final steering mirror both change as the mirrors scan the laser beam, the use of fixed axis correction transducers mounted in fixed locations makes the correction imperfect. The associated errors are estimated and expected to be generally small, and the theoretical basis...

Applying Laser Doppler Anemometry inside a Taylor-Couette geometry - Using a ray-tracer to correct for curvature effects

Measuring Flow Velocity Distribution in Microchannels Using Molecular Tracers

Measuring Straightness Method with Common Path Compensation for Laser Drift

Error Correction Of Laser Scanning System For Reverse Engineering

Laser Doppler Anemometry for Flow Measurement

Measurement of Two-Phase Velocities in Bubble Flows Using Laser Doppler Velocimetry

Air cavities at the inner cylinder of turbulent Taylor-Couette flow

New Laser Doppler Velocimetry Using Self-Mixing Effect in A Vertical-Cavity Surface-Emitting Laser Modulated by Triangular Current

Investigation on swirling jet velocity using 3D-LDA technology

Numerical Approaches and Analysis of Optical Measurements of Laser Radar Cross-Sections Affected by Aero-Optical Transmission

Experimental Verification of a Modified Cylindrical Focused Laser Differential Interferometer

A novel laser Doppler anemometer (LDA) for high-accuracy turbulence measurements

Laser Doppler Anemometry of Cavitating Hydrofoil in a Slit

Numerical Investigation of Aero-Optical Distortions from High-Speed Turbulent Boundary Layers

Field-curvature Effect on the Diffraction Ring Pattern of a Laser Beam Dressed by Spatial Self-Phase Modulation in a Nematic Film

Laser Confocal Measurement System for Curvature Radii of Lenses

Establishing correction solutions for Scanning Laser Doppler Vibrometer measurements affected by sensor head vibration

Curvature Sensor Based on Fiber Ring Laser with Sagnac Loop

Study on the measurement of in-plane displacement of solid surfaces by laser Doppler velocimetry

Simultaneous two-dimensional velocity and distance measurements based on laser triangulation

Search for anisotropic light propagation as a function of laser beam alignment relative to the Earth's velocity vector