Abstract:A small-sized brake generating the torque less than 0.5 Nm is very attractive to achieve desired dynamic motions in many different fields such as medical haptic and auto door closure. In this work, a controllable compact-sized brake utilizing a magnetorheological fluid (MRF) is proposed and its effectiveness is validated through simulation and experiment. Unlike conventional shear mode magnetorheological brake (MRB), a mixed mode MRB (M-MRB) featuring both the flow and shear mode operations is designed to obtain high torque efficiency in which both the key shape and ring shape structures play the significant role. Through these structures, the proposed M-MRB can provide higher torque with the relatively less amount of MRF than conventional shear mode MRB. The key shape structure is fixed to the rotor and shaft of MRB and rotates in same direction. Then, MRF on the front and back of the barrier is subjected to the pressure difference resulting in the field-dependent torque generation. To demonstrate the effectiveness of the proposed design concept, a small-sized M-MRB is designed and manufactured considering the required torque level and space constraint of auto door closure applicable to autonomous vehicle systems. It is identified through a reasonable comparison between the proposed M-MRB and conventional MRB that the proposed one can improve controllable torque range up to 325% with less MR fluid than conventional MRB.

A Novel MRF-Based Torque Servo Device

Design, Modeling and Testing of Torque Servo Driver Based on Magnetorheology

A Novel Dead-Beat Torque Control of Switched Reluctance Machines

Study on Effects of Input Rotational Speed on Output Torque of Magnetorheological Torque Servo

A Study on Cylindrical Type of MR Fluid Actuator

A Novel Method of Bonnet Polishing for Aspheric Surface

Development of Second Prototype of Twin-Driven Magnetorheological Fluid Actuator for Haptic Device

A new design of small-sized magnetorheological brakes based on the mixed mode operation for high torque efficiency

DYNAMIC BEHAVIOUR OF SHEAR-TYPE MAGNETORHEOLOGIC GREASE DAMPER ROTOR SYSTEM

Dynamics of A Rotor Supported on Magnet-Rheological Fluid Squeeze Film Damper

An Experimental Study into Dynamic Behavior of a Magnetorheological Fluid Squeeze Film Damper – Overhung Flexible Rotor

Optimizing Parameters for Magnetorheological Finishing Supersmooth Surface

Position Tracking Control of a Magnetorheological Fluid Actuation System

Structural Optimization of Clutch Activated by Magnetorheological Fluid

Modeling and Suppression of Torque Ripple in PMSM Based on the General Airgap Field Modulation Theory

Optimal Control for a Modified Bouc-Wen Model in a Magnetorheological Fluid Master Robot

A novel wheel-type vibration-magnetorheological compound finishing method

Design and Study of Rotary Magnetorheological Fluid Testing Device

Development of a Rotary Damper Integrated with Magnetorheological Bearings Toward Extremely High Torque–Volume Ratio

Robotic Magnetorheological Finishing Technology Based on Constant Polishing Force Control