Abstract:Ni20Al30Fe intermetallic alloy was synthesized by laser powder deposition. Heat treatment experiments on the synthesized layer were conducted at different heat temperature and time to investigate the microstructure evolution. The results indicate that laser deposited Ni20Al30Fe intermetallic alloy consists of β phase and a few γ phase particles. The sizes of the crystal grains are within 30-50µm. After heat treatment at 650°C and 850°C, more γ phase precipitates in particle-shape and strip-shape within the crystal grains or along the crystal boundaries. With the increase of heat temperature and isothermal holding time, the sizes and amount of the γ phase increase. At the same time, the sub-crystal grains combine and grow, the sub-crystal boundaries disappear. The precipitation of the γ phase is favorable to the improvement of ductility of the Ni20Al30Fe intermetallic alloy. After heat treatment at 1050°C, recrystallization of the crystal grains occurs, which results in the refinement of the microstructure.Ni20Al30Fe intermetallic alloy was synthesized by laser powder deposition. Heat treatment experiments on the synthesized layer were conducted at different heat temperature and time to investigate the microstructure evolution. The results indicate that laser deposited Ni20Al30Fe intermetallic alloy consists of β phase and a few γ phase particles. The sizes of the crystal grains are within 30-50µm. After heat treatment at 650°C and 850°C, more γ phase precipitates in particle-shape and strip-shape within the crystal grains or along the crystal boundaries. With the increase of heat temperature and isothermal holding time, the sizes and amount of the γ phase increase. At the same time, the sub-crystal grains combine and grow, the sub-crystal boundaries disappear. The precipitation of the γ phase is favorable to the improvement of ductility of the Ni20Al30Fe intermetallic alloy. After heat treatment at 1050°C, recrystallization of the crystal grains occurs, which results in the refinement of the microstructure.

Characterization on the Precipitates in the Ti-Ni-Al-Zr Alloy During Heat Treatment

Effect of Heat Treatment on Morphology Evolution of Ti2Ni Phase in Ti-Ni-Al-Zr Alloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Effect of Heat Treatment on the Microstructure of Multiphase Nial-Based Alloy

Effects of heat treatment on hydriding/dehydriding characteristics of Ti18Cr24V55Zr3 alloy

Effects of Heat Treatment on the Transformation Temperature and the Microstructure of Ni-Ti-Nb Shape Memory Alloy

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

Effect of Heat Treatment Temperature on Microstructure, Tensile Properties and δ-Precipitate Phase in Ni-based Superalloy

In Situ Synchrotron Radiation X-ray Diffraction Study on Phase and Oxide Growth during a High Temperature Cycle of a NiTi-20 at.% Zr High Temperature Shape Memory Alloy

Effect of Zr Element Addition on the Mechanical Behavior of Ti48.5-Xni49.5nb2 Alloy

The effect of high temperature thermomechanical cycle treatment on the microstructural refinement of TiNi alloy

Orderly Nucleation and Competitive Growth Behaviors of Ti-Al Intermetallic Compounds in Ti/TiAl3 Diffusion Couple under High Temperature

Influence of Heat Treatment on Microstructure of Laser Powder Deposited Ni20Al30Fe Intermetallic Alloy

Phase Transformation Behavior of Ti49ni49.5fe1v0.5 and Ti48ni48.5fe1v2.5 Alloys after Different Heat Treatments

Multiple effects of Ni-rich precipitates in Ni–Ti–Al thin films

TEM characterization of the precipitation reaction in Ti–48Al–10Nb alloy

Effect of microalloying additions on microstructural evolution and thermal stability in cast Al-Ni alloys

Microstructure Evolution of a Ti–Al–Sn–Zr Based Alloy During the Hot Compression Deformation

Effect of Solution Temperature on Microstructure and Mechanical Properties of Ti–5Al5Mo5V3Cr1Zr Alloy

Molecular dynamics study of phase transformations in NiTi shape memory alloy embedded with precipitates

The role of the ω phase on the microstructure evolution of precipitation and mechanical property in Ti-3Al-5Mo-4Cr-2Zr-1Fe