Abstract:The machining quality of the functional edges of inner ring groove have great influence on the performance of electro-hydraulic servo valve. The inclination angle of the functional edge is one of the most important indicators to evaluate the processing quality of functional edges. Therefore, a pneumatic measuring method based on pneumatic measuring theory for measuring the inclination angle of the edge of inner ring groove is proposed. The principle of measuring method and calculation method are analyzed. The measuring system parameters such as air source pressure, inlet nozzle diameter and slit width, which influence the measurement results are compared and analyzed, respectively. The results showed that those three measurement parameters significantly affect the slope of the measuring pressure curve. When the air source pressure, the inlet nozzle diameter and slit width are chosen as 90 kPa, 0.3 mm and 3 mm, respectively, the measurement system can be kept in a "subsonic-subsonic" state and good curve slope can be obtained. Based on the analysis, the measuring air path and other mechanical structure are designed. The experimental results indicate that the inclination angle relative to the central axis is 0.0387°. The proposed pneumatic measuring method can effectively measure the inclination angle of edge of the inner ring groove, which provides a method for evaluating the performance of the valve sleeve.

Pneumatic Measurement Approach for Form Tolerances of Inner Hole in Spool Valve

Measurement System and Evaluation Approach for Straightness Error of Valve Sleeve Inner Hole

Design and Accuracy Analysis of Pneumatic Gauging for Form Error of Spool Valve Inner Hole

Research on Pneumatic Measurement System for Inner Hole Cylindricity Error of Slide Valve

Modeling of a pneumatic system for high-accuracy position control

Visual Measurement of Valve Opening Area with Improved Subpixel Edge Location

A Stitching Linear-Scan Method for Roundness Measurement of Small Cylinders

Numerical simulation and experimental research on the characteristic of pneumatic pressure measurement of spool valve orifice

Research and Development of A Test System for the Dynamic Performance Testing of Pneumatic Solenoid Valves

Pneumatic Resistance Network Analysis and Dimension Optimization of High Pressure Electronic Pneumatic Pressure Reducing Valve

Study on Pneumatic Measurement Method and System for Throttling Edge Coplanarity Error of Valve Sleeve

Study on Automatic Measurement of Valve Orifice Characteristic Based on Pneumatic Flow Method

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

Design of a Spool Valve Overlap Value Pneumatic Measuring System Based on Constant Pressure Control

Researchment on Valve Sleeve Bore'S Cylindricity Pneumatic Measurement Technology Based on Error Compensation

Pneumatic Measuring Method for Inclination Angle of the Edge of Inner Ring Groove

Development of pneumatic measurement and device for servo valve orifice edge axial dimension error

Study On A New Measuring Method For Axial Jitter Of Valve Orifice Working Edges

A Non-Ideal Geometry Based Prediction Approach of Fitting Performance and Leakage Characteristic of Precision Couplings.

Gross Error Detection in Pneumatic Measurement of Form Tolerance Based on Fuzzy Assessment

A New Method to Measure the Taper of Part Hole by Pneumatic-to-current