Abstract:Purpose – The vortex ropes in draft tube of Francis turbine always cause fluctuation and vibration, which consequently threaten the safety and stability of hydro turbines. The purpose of this paper is to use a cavitation flow computational method to simulate spiral vortex ropes under part load conditions and columnar vortex ropes under high-load conditions in draft tube. The unsteady cavitating flow characteristics in draft tube and its interaction with runner cavitation were analyzed. Design/methodology/approach – The calculation method was verified by cavitation simulation around a 3D hydrofoil. The results show that the Large Eddy Simulation (LES) turbulence model with the Zwart-Gerber-Blemari cavitation model have comparative advantage in cavitation simulations whether from capture of cavity shape or prediction of pressure changes. So it was chosen to simulate the two-phase cavitation flow in Francis turbine. The boundary conditions for inlet and outlet were set to inlet total pressure and outlet static pressure. The finite volume method with the central difference was adopted to discretize the equations. Findings – The calculated Thoma number agreed well with the experimental data. The vortex rope diameter and length increased with the cavitation development for both of the two types of vortex ropes conditions. The maximum peak-to-peak values of pressure pulsations located in the draft tube elbow part under all of the Thoma numbers conditions. Under spiral vortex rope conditions, the pressure pulsation in the same section of draft tube cone show obviously phase shift. The vortex rope affects the development of runner cavitation, which induces the symmetric and axisymmetric cavitation region in the suction side of blades for spiral and columnar vortex rope condition, respectively. Research limitations/implications – The mesh independence had been checked only in non-cavitation flow; in addition, the mesh density did not well satisfy the requirements of LES due to the limitations of computing power. The higher mesh density on a simplified model with one blade flow path and the entire draft tube may be helpful for obtaining more precise results. Originality/value – The spiral and columnar vortex ropes in a Francis turbine were compared and analyzed. The annular hydraulic jump appeared in the columnar vortex rope conditions has little effects on the pressure pulsations. The uneven flow field caused by spiral vortex led to the asymmetric cavitation development.

Numerical Simulation Of Blade Channel Vortex In A Low Head Francis Turbine

Numerical Simulation Of Cavitating Turbulent Flow In A Francis Turbine With Draft Tube Natural Air Admission

Numerical Investigation of Cavitating Turbulent Flow in a Francis Turbine Runner Fitted with Splitter Blades

Numerical simulation of cavitating turbulent flow in a high head Francis turbine at part load operation with OpenFOAM

Numerical investigation on channel vortex in a francis turbine

Numerical Analysis of Blade Channel Vortex in Francis Turbine at Part Load of Middle-Low Head

Numerical Simulation of the Blade Channel Vortices in A Francis Turbine Runner

Numerical Simulation Of Cavitating Turbulent Flow Through A Francis Turbine

Numerical simulation of the runner blade channel vortex in Francis turbine

Numerical Simulation Of Cavitating Flow In A Francis Turbine

Experimental and Numerical Analysis of Blade Channel Vortices in A Francis Turbine Runner

Numerical Simulation Of 3d Cavitating Turbulent Flow In Francis Turbine

Numerical Analyses of Pressure Fluctuations Induced by Interblade Vortices in a Model Francis Turbine

Numerical Simulation of Unsteady Flows Through A Francis Turbine Runner Using Vortex Methods

Numerical Simulation of Complex Turbulence in an Across Scale Flowing Passage of Francis Turbine

Numerical Predictions of the Incipient and Developed Interblade Vortex Lines of A Model Francis Turbine by Cavitation Calculations

Numerical Analysis of Flow in A Francis Turbine on an Equal Critical Cavitation Coefficient Line

Numerical Simulation and Analysis of the Internal Flow in A Francis Turbine with Air Admission

Numerical Simulation of 3D Cavitation Turbulent Flow in Francis Hydro-turbine Passage on Mixture Modeling Technology

Vorticity Dynamics Analysis On Flow In Francis Hydraulic Turbine

The Numerical Simulation of Draft Tube Cavitation in Francis Turbine at Off-Design Conditions