Abstract:PurposeThe purpose of this paper is to investigate, experimentally and numerically, the pressure pulse characteristics and unsteady flow behavior in a Francis turbine runner for moderate flow heads. The pressure pulses in the runner blade passage were predicted numerically for both moderate and high heads. The calculations were used to partition the turbine operating regions and to clarify the various for the unsteady flow behavior, especially the blade channel vortex in the runner.Design/methodology/approachExperimental and numerical analyses of pressure pulse characteristics at moderate flow heads in a Francis turbine runner were then extended to high heads through numerical modeling with 3D unsteady numerical simulations performed for a number of operating conditions. The unsteady Reynolds‐averaged Navier‐Stokes equations with the k‐ω‐based shear stress transport turbulence model were used to model the unsteady flow within the entire flow passage of a Francis turbine.FindingsThe dominate frequency of the predicted pressure pulses at runner inlet agree with the experimental results in the head cover at moderate flow heads. The influence of the blade passing frequency causes the simulated peak‐to‐peak amplitudes in the runner inlet to be larger than in the head cover. The measured and predicted pressure pulses at different positions along the runner are comparable. At the most unstable operating condition of 0.5a0 guide vane opening, the pressure pulses in the runner blade passage are due to the blade channel vortex and the rotor‐stator interference. The predictions show that the frequency of the blade channel vortex is relatively low and it changes with the operating conditions.Originality/valueThe paper describes a study which experimentally and numerically investigated the pressure pulses characteristics in a Francis turbine runner at moderate flow heads. The pulse characteristics and unsteady flow behavior due to the blade channel vortex in the runner at high heads were investigated numerically, with the turbine operating regions then partitioned to identify safe operating regions.

Numerical Simulation of Unsteady Flows Through A Francis Turbine Runner Using Vortex Methods

THERE DIMENSIONAL VORTEX METHOD SIMULATION OF UNSTEADY FLOW IN HYDRAULIC TURBINE

Three-Dimensional Vortex Simulation Of Unsteady Flow In Hydraulic Turbines (Vol 69, 1679, 2012)

Numerical Simulation Of Cavitating Turbulent Flow Through A Francis Turbine

Numerical Simulation of Complex Turbulence in an Across Scale Flowing Passage of Francis Turbine

Vorticity Dynamics Analysis On Flow In Francis Hydraulic Turbine

Numerical simulation of 3-D turbulent flow through turbine runners

Simulation of Unsteady Flow Induced by in Vortices the Draft Tube of a Francis Turbine

THREE DIMENSIONAL UNSTEADY SIMULATION OF A MODEL FRANCIS HYDRAULIC TURBINE

3-D Unsteady Flow Field Numerical Simulation of Whole Flow Passage in Francis Turbine

Numerical simulation of the runner blade channel vortex in Francis turbine

Numerical Investigations of Solid-Liquid Two-Phase Turbulent Flows through Francis Turbine

Numerical Simulation Of 3d Cavitating Turbulent Flow In Francis Turbine

Numerical Analysis of Unsteady Flow under High‐head Operating Conditions in Francis Turbine

Numerical Analysis of Blade Channel Vortex in Francis Turbine at Part Load of Middle-Low Head

Numerical Simulation Of Cavitating Flow In A Francis Turbine

Numerical Simulation Of Blade Channel Vortex In A Low Head Francis Turbine

Experimental and Numerical Analysis of Blade Channel Vortices in A Francis Turbine Runner

Numerical Simulation Of The Unsteady Flow In A High-Head Pump Turbine And The Runner Improvement

Numerical simulation of cavitating turbulent flow in a high head Francis turbine at part load operation with OpenFOAM