Abstract:The crack extension resistance and fracture properties are studied in detail for quasi-brittle materials like concrete with a softening traction-separation law by investigating the complete fracture process. The computed samples are the three-point bending notched beams of concrete with different sizes tested by other researchers. The softening traction-separation law which was proposed by Reinhardt et al. based on direct tension tests for normal concrete materials was chosen in the computations. Different distribution shapes of the cohesive force on the fictitious crack zone were considered for the corresponding loading states. The computations were mainly based on the analytic solutions for this problem using Gauss–Chebyshev quadrature to achieve the integration which is singular at the integral boundary. The crack extension resistance curves in terms of stress intensity (K R -curves) were determined by combining the crack initiation toughness K_ Ic^ini that is the inherent toughness of the material needed to resist the crack initiation in the case that is in the lack of an extension of the main crack with the contribution due to the cohesive force along the fictitious crack zone during the complete processes of fracture. The situation of crack propagation can be judged by comparing K R -curves of crack extension resistance with the stress intensity factor curves which were calculated using the lengths of the extending crack and the corresponding loads at each loading states, e.g., when the crack extension resistance curve(K R -curve) is lower than the stress intensity factor curve, the crack propagation is stable; otherwise, it is unstable. In the computation, the obtained relationship between the crack tip opening displacement CTOD and the amount of crack extension for the complete fracture process is in agreement with the testing results of other researchers.

Stress Distribution Rule of Reinforced Concrete Specimen under Uniaxial Tension

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

Stress-Strain Behaviour Of Frp-Confined Concrete Subjected To Eccentric Compression

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

Scf Distribution Of Concrete-Filled Chs T- And Y- Joints Under Axial Tension

Influence of Axial Stress on Shear Response of Reinforced Concrete Elements

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Fracture Energy Method in Predicting Crack Spacing of Reinforced Concrete Structures

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

Fracture Energy-Based Model for Average Crack Spacing of Reinforced Concrete Considering Size Effect and Concrete Strength Variation

Mechanical properties and numerical simulation of crack interface in reinforced concrete

Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading

STUDY OF CONCRETE FRACTURE PROCESS ZONE BASED ON FICTITIOUS CRACK MODEL

Crack-Parallel Stress Effect on Fracture of Fiber-Reinforced Concrete Revealed by Gap Tests

Analysis of Concrete Fracture Process and Size Effect

Experimental Study on Strength and Failure Characteristics of Reinforced Concrete Plate under Complex Stresses Conditions

Crack Extension Resistance and Fracture Properties of Quasi-Brittle Softening Materials like Concrete Based on the Complete Process of Fracture

Experimental and Theoretical Investigations on Crack Spacing and Stiffness of Textile-Reinforced Concrete–strengthened Reinforced Concrete Beams

Stress Analysis of Concrete Materials Based on Finite Element Analysis

Stressing State Analysis of Partially Prestressed Concrete Beams with High Strength Reinforcement Based on NSF Method.