Abstract:In this paper, a non-contact coordinate measuring machine with laser displacement sensor, which consists of three translational axes, is designed and built independently. In order to obtain the measuring precision, it needs to calibrate the coordinate measuring machine. Learning from the calibration method of contact coordinate measuring machine, a detection method is proposed for calibrating the precision of the non-contact coordinate measuring machine. Based on the homogeneous coordinate transformation theory, the error model of coordinate measuring machine is built under the condition that the positioning errors, angular errors, straightness errors and perpendicularity errors are taken into comprehensive consideration. The final error expressions of three axes can be calculated in the use of error model and homogeneous coordinate transformation theory. The final values of the errors are acquired through the analysis of the error curves, which can be obtained by using the laser interferometer system. The method proposed in this paper is using the two-dimensional ball plate to measure the errors. By locating three different positions of the ball plate in the space and using automatic centering procedure to measure the center position which is previously calibrated, the final errors of three axes can be detected directly. By comparing the two results, it testifies that the two-dimensional ball plate detection method is reasonable. Comparing with the laser interferometer method, the two-dimensional ball plate detection method reduces the workload of adjusting the optical path and the time of measuring errors, which has the vital significance in calibrating the precision of non-contact coordinate measuring machine.

A Calibration Device and Method to Calibrate the Beam’s Direction of the Point Laser Probe

Calibration of Laser Beam-Direction for Point Laser Sensors

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

High-precision laser alignment technique based on spiral phase plate

Line Structured Light Calibration System Based on Planar Complementary Target

Calibration of the laser displacement sensor and integration of on-site scanned points

Calibration of a Single-Point Laser Range Finder and a Camera

Calibration of Beam Vector Deviation for Four-Axis Precision On-Machine Measurement Using Chromatic Confocal Probe

A Robust and Efficient Calibration Method for Spot Laser Probe on CMM

A novel approach on calibration calibration of a laser line sensor's position in the machine coordinate system

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Influence of Incident Angle on Distance Detection Accuracy of Point Laser Probe with Charge-Coupled Device: Prediction and Calibration

Error Detection Technology for Calibrating Precision of Non-Contact Coordinate Measuring Machine

Pose Calibration for 2D Laser Profiler Integrated in Five-Axis Machine Tools

Laser Beam Based Calibration

Fiducial-aided Calibration of a Displacement Laser Probing System for In-Situ Measurement of Optical Freeform Surfaces on an Ultra-Precision Fly-Cutting Machine.

Multi-position calibration method for laser beam based on cyclicity of harmonic turntable

A Multi-Axis Space Coordinate System Calibration Method for Composite Line Laser Measuring Systems Using Non-Feature Planes and Multi-Angle Spheres

Optimized Laser Beam Widths Meter Calibration System: Precisely Positioning of Detector Measurement Plane

Calibration of Laser Displacement Sensor Used by Industrial Robots

Calibration Method for A Vision Guiding-Based Laser-Tracking Measurement System