Abstract:Virtual testing is a method that simulates lab testing using multi-body dynamic analysis software. The main advantages of this approach include that the design can be evaluated before a prototype is available and virtual testing results can be easily validated by subsequent physical testing. The disadvantage is that accurate specimen models are sometimes hard to obtain since nonlinear components such as tires, bushings, dampers, and engine mounts are hard to model. Therefore, virtual testing accuracy varies significantly. The typical virtual rigs include tire and spindle coupled test rigs for full vehicle tests and multi-axis shaker tables for component tests. Hybrid simulation combines physical and virtual components, inputs and constraints to create a composite simulation system. Hybrid simulation enables the hard to model components to be tested in the lab. As a result, it greatly reduces the requirement for an accurate analysis model and increases the chance for obtaining more accurate results. Mechanical Hardware-in-the-Loop? (mHIL™) is one of the hybrid simulation approaches. It has been developed to enable actual physical components to replace selected components for "Real-Time" vehicle dynamic simulation. In this approach, the virtual to physical coupling is accomplished in "real-time" allowing an accurate vehicle dynamics simulation to be conducted in a hybrid environment. The disadvantage of this approach is that the "real-time" requirement poses significant constraints on the model and test rig. To address the limitation of real-time techniques, an alternative technique, Hybrid System Response Convergence (HSRC), has been developed. The HSRC method uses an iterative approach to develop a solution that satisfies the equations of motion for the hybrid system. The iterative approach allows the physical and virtual systems to run sequentially as open-loop systems, rather than simultaneously, thus avoiding the requirement to run in real-time. The disadvantage of this method is that an iterative approach is more time consuming. Another approach addressing the limitation of real-time is to use a software named OpenFresco and a predictor-corrector algorithm to connect dynamic analysis software and a test system. If the solving speed cannot meet the requirement of real time, the predictor-corrector algorithm slows down the actuator to allow more time for the model to be solved. This approach is called soft real-time hybrid simulation. The disadvantage of this approach is that it still requires the hybrid simulation to be conducted at the near "real-time" speed.

Hardware-in-the-Loop Simulation of a Dynamic Process by Compensation of the Transfer System

Compensation of Velocity Divergence Caused by Dynamic Response for Hardware-In-The-Loop Docking Simulator

Dynamic decoupling and compensation based on the inverted network technique and experiment research for multi-axis hydraulic road simulator

A Force Compensation Approach Toward Divergence of Hardware-In-The-Loop Contact Simulation System for Damped Elastic Contact

Hardware-in-the-loop simulation for contact dynamics in space

The Application of Hardware-in-the-loop on the Hybrid Power System’s Simulation

Discrete-Time Compensation Technique for Real-Time Hybrid Simulation

A Force and Displacement Compensation Method Toward Divergence and Accuracy of Hardware-in-the-Loop Simulation System for Manipulator Docking

Design of Multivariable Control System for Variable Cycle Engine and Hardware-in-the-Loop Simulation

A Robotic Hardware-in-the-Loop Simulation System for Flying Objects Contact in Space.

Divergence Compensation for Hardware-in-the-loop Simulation of Stiffness-Varying Discrete Contact in Space

Hardware-in-loop simulation of underwater heat-engine system

A Force- and Position-Based Distortion Compensation Method for a Hardware-in-the-Loop Simulator of Space Docking

Adaptive Feedforward and Feedback Compensation Method for Real-time Hybrid Simulation Based on a Discrete Physical Testing System Model

Smith Predictor Compensation and Fuzzy Incremental Control for Delay of Space Docking Hardware-in-the-loop Simulation System

Adaptive velocity synchronization compound control of electro-hydraulic load simulator

Distributed Delay Compensation for a Hybrid Simulation System of Space Manipulator Capture

A Passivity-Based Velocity Control Method of Hardware-in-the-Loop Simulation for Space Robotic Operations

Advances of Virtual Testing and Hybrid Simulation in Automotive Performance and Durability Evaluation

The rapid development of vehicle electronic control system by hardware-in-the-loop simulation

Study on Expected Frequency Characteristics Control in Hardware-in-the-Loop Simulation