Abstract:For the grid-connected wind turbine, the frequency converter is used to connect the generator and the grid, which makes the power quality weaker than the conventional synchronous generator. To solve such a problem, a continuously variable transmission (CVT) can be connected at the high speed end of the gearbox to obtain the constant speed output at varying wind speeds for the generator. The frequency converter can then be neglected. However, shafts of the CVT suffer the external disturbances caused by grid faults. The speed tracking accuracy of the CVT can be affected seriously. So, this paper presents the adaptive robust speed control (ARSC) for the CVT, which regulates the speed output through the permanent magnet synchronous motor (PMSM). Model uncertainties of the PMSM, such as the inertia load, friction force, and external disturbances, are considered in the control scheme. The designed controller guarantees high performance and speed tracking accuracy at different wind speeds and simulated grid faults. The experimental results demonstrate the proposed CVT controller at varying wind speeds simulated via the software of FAST and the simulation of grid faults, such as one phase short-circuit and sudden load fluctuation, at a built testbed, which is used to emulate the wind turbine with the CVT. For the comparison, the PID controller for the CVT is then applied in the testbed. The results show that the ARSC method owns better performance and speed tracking accuracy than the PID method. In order to verify the utility scale for the ARSC based CVT, we build a Simulink program for a 1.5 MW wind turbine with the CVT. Simulation results show that the ARSC based CVT still owns high speed tracking accuracy in the large scale wind turbine.

The Novel Control Technology of Wind Turbine in VSCF Wind Power Generation System

Control Method for Fault Ride-through of DFIG-based Wind Turbines Applied to Weak Grids

Transient Voltage Stability Analysis and Enhancement of Grid-Following Converters Considering Current Limitation

Improved VSG Control Strategy for Wind Turbines Connected to Non-Synchronized Grid under Commutation Failure

A Three-Phase Programmable Voltage Sag Generator for Low Voltage Ride-Through Capability Test of Wind Turbines

Advanced Control Of Photovoltaic And Wind Turbines Power Systems

A novel nonlinear decoupled controller for VSC-HVDC system

Nonlinear Subsynchronous Oscillation Damping Controller for Direct-Drive Wind Farms with VSC-HVDC Systems

Coordinated Control of Voltage Ride Through for DFIG Wind Turbine Systems Using Energy-based DVR

Fault ride-through control and its impacts on wind generators in a VSC-HVDC system

A Novel Power-Flow Balance Lvrt Control Strategy For Low-Speed Direct-Drive Pmsg Wind Generation System

A Nonlinear Adaptive Stabilizing Control Strategy to Enhance Dynamic Stability of Weak Grid-Tied VSC System

A Novel Fault Ride Through Control Strategy for DFIG Wind Turbine in Weak Systems

Adaptive robust speed control for continuously variable transmission in wind turbine under grid faults

Dual-mode Switching Fault Ride-through Control Strategy for Self-synchronous Wind Turbines

Model Predictive Control on Transient Flux Linkage and Reactive Power Compensation of Doubly Fed Induction Wind Generator

Fault-ride Through Control Strategy of Multi-terminal High Voltage DC Systems

Transient stability and FRT technologies of different synchronous wind turbine

Reactive Power and Voltage Control in VSC-HVDC Connected Wind Farms Considering Stochastic Wind Power

Decentralized Robust Emergency Voltage Control of Power System With Large-Scale Wind Power Integrated via VSC-MTDC

Simulation Analysis and Optimization Design of the Variable-Speed Constant-Frequency Doubly Fed Wind Power Generation Control System Based on PSCAD