Abstract:Superplasticizers, polyacrylate latexes and asphalt emulsions were employed to investigate the influences of chemical admixtures with different sizes on the pore structure and impermeability of hardened cement pastes. With different admixture types and contents, pore structure and impermeability of specimens cured for 28 days were tested by mercury intrusion porosimetry and alternating current impedance, respectively. Scanning electron microscopy was also used to observe the microstructure of fresh and hardened pastes. The results show that, porosity, average pore size and inkbottle pores volume in the hardened cement pastes as well as permeability presented slight decrease with the increase in the content of superplasticizers. For the specimens with low latex content, the pore size in the hardened cement paste remained unchanged, or was coarsened, and the compactness and impermeability declined; for those with high latex content, the pore size was refined and compactness and impermeability were enhanced. Both of the compactness and impermeability increased with the increase in asphalt emulsion content. At the same content, the latex Ll, having smaller particle size was more effective than latex L2 and, the anionic asphalt emulsion was more effective than cationic asphalt emulsion on improving pore structure and impermeability, respectively. It was accepted that chemical admixtures were able to improve the flowability of fresh paste by enhancing the dispersion of cement grains, further the effects were extended to affect the pore structure and impermeability of hardened one. Meanwhile, the polymer was also effective to compact the interfacial zone between phases by filling up the pore space, which would lead to more compact structure of hardened paste. For the same type of chemical admixture at low content, the pore structure and impermeability were mainly influenced by the dispersion of cement grains, while at high content, the filling effect become dominant. For different types of chemical admixtures with the same filling effect, the better dispersion of cement grains would result in finer pore structure and higher impermeability.

Research on the Effect of Beads on Properties and Microstructure of Cementing Materials

Effect of Fiber on Mechanical Properties of Cement Stabilized Macadam Mixture

Study on the Dense-Packing Effect and Properties of Multi-Component Cementitious Material

Effect Of Composite Nano-Addition On Mechanics Strength And Microstructure Of Cement Paste

Investigations on the Preparation and Mechanical Properties of the Nano-Alumina Reinforced Cement Composite

Research on Structure of Fresh Composite Cement Pastes with Thickener Added

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

Study on the Effects of Powder-Liquid Ratio and Cement Ratio on Mechanical Properties and Microscopic Characteristics of Polymer-Cement Composite

Influences Of Chemical Admixtures With Different Sizes On Pore Structure And Impermeability Of The Hardened Cement

Effects of Mineral Admixtures on the Evolution of Static Yield Stress of Different Composite Pastes

Effect of initial defects on the microstructure, mechanics, and energy dissipation characteristics of cemented paste backfill

The Effects of Particle Packing and Inter-particle Force on Rheological Behaviors of Binary Cement Paste

Experimental Investigation on the Effect of Pressure-Filtration Method on Compressive Strength and Microstructure of Cement Paste

Pore Structure Characteristics and Its Effect on Mechanical Performance of Cemented Paste Backfill

INFLUENCE OF LIMESTONE POWDER ON FILLING EFFECT OF CEMENT PASTE AND PORE STRUCTURE OF SAND GROUT

Investigating the effect of polycarboxylate-ether based superplasticizer on the microstructure of cement paste during the setting process

Microstructural Characteristics of Composite Binders Containing Fly Ash and (or) Tuff Powder

Effect of core–shell nanocomposites on the mechanical properties and rheological behaviors of cement pastes

Effect of Sand Content on Strength and Pore Structure of Cement Mortar

MICROSTRUCTURAL CHARACTERISTICS OF COMPLEX BINDER PASTE CONTAINING ACTIVE OR INERT MINERAL ADMIXTURES

Influence of Hardened Paste Microstructure on Rheological Property of Cementing Slurries with High Density