Abstract:To explore the feasibility of in-situ pouring heavy metal stabilizers to remediate heavy metal-polluted river sediment, a comparative study of injection of Na 2 S, CaS x , and FeSO 4 on stabilization of Cr, Cd, Pb, As and Sb in the sediment from electronic waste polluted river was conducted. The three kinds of heavy metals stabilizers were added to the sediment individually with increasing concentrations from 3% to 10%. The results show that the leaching of Cd and Pb is completely inhibited by the addition of each of the three kinds of stabilizers at a dosage ratio of 30%. For stabilization of Cr、As and Sb, FeSO 4 exhibits the best performance followed by CaS x and Na 2 S. The leaching concentrations of Cr, Cr 6+ , As and Sb are reduced by 90%, 97%, 100% and 100% by the addition of 3%, 5%, 8%, and 10% of FeSO 4 , respectively. Therefore, the addition of 3% of FeSO 4 is recommended based on the consideration of the stabilization effect of heavy metals, economic cost, and sediment compatibilization. The rebound of leaching concentrations of Cr and Cr 6+ was found for all the three kinds of stabilizers, but the rebound of leaching concentrations of As and Sb was only found for Na 2 S and CaS x . The mechanism of reducing agent stabilizing heavy metals in sediment is mainly by promoting the transformation of heavy metals from a weak acid soluble state to an oxidizable state and residue state. The leaching concentration of Cr 6+ is reduced by lower than the threshold values for the third-grade water quality of China environmental quality standards for surface water after the sediment is treated by combined use of 5% Ca（OH） 2 and 3% FeSO 4 and reaction for 7 days. The leaching concentration of Cr 6+ is found to be further decreased after reaction for 14 days, indicating a long-term persistence for Cr 6+ stabilization. The mechanism of Ca（OH） 2 for strengthening FeSO 4 to stabilize Cr in sediment is mainly by promoting the transformation of Cr from a weak acid soluble state to a residual state.

Stabilization of Heavy Metal Containing Smelting Ash Through Mechano-Chemical Reaction

Remediation of As and Cd Contaminations by Composite Material Additives in Smelting Site Soil

Mechanochemical Sulfidation of Heavy-Metal Containing Waste Residue for Stabilization

Mechanochemical Stabilization of Heavy Metals in Fly Ash with Additives.

Stabilization of arsenic bearing solid waste with Fe-MnO2 activated by mechanochemical process

Mechanochemical stabilization of heavy metals in fly ash from coal-fired power plants via dry milling and wet milling

Rapid Leaching Test and Treatment for Heavy Metals in Bottom Ash from Hazardous Waste Incinerator

Cement and zeolite stabilization/solidification of heavy metal-contaminated sediments: 841-Day leaching characteristics, mechanisms, and microstructure

Remediation of Multiple Heavy Metals Contaminated Soils by Mn and Fe-added Solid Wastes: Effect and Mechanisms

Feasibility of Stabilizing Cd, Pb, and Ni in MSWI Fly Ash Using Leachate As an Alternative Stabilizer

Experimental Study of Heavy Metal Stabilization in Fly Ash of Waste Combustion Using Inorganic Reagents

Mechanochemical stabilization of lead containing soil for contaminated site remediation

Synchronous stabilization of Pb, Zn, Cd, and As in lead smelting slag by industrial solid waste

[Leaching and Stabilization of Heavy Metal in the Fly Ash of Medical Wastes].

Effect of a Mechanochemical Process on the Stability of Mercury in Simulated Fly Ash. Part 1. Ball Milling

In situ mechanochemical activation of reduced iron powder for arsenic stabilization in high content arsenic sulfide sludge

Performance of Chemical Chelating Agent Stabilization and Cement Solidification on Heavy Metals in MSWI Fly Ash: A Comparative Study.

Effect and mechanism of injection of heavy metal stabilizers for remediation of multiple heavy metals comminated river sediment

Suppressing Heavy Metal Leaching Through Ball Milling of Fly Ash

Chemical stabilization of MSW incinerator fly ashes.

Efficient Stabilization of Mercury-Rich Fly Ash Via Mechanochemical Method