Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

Parallel Vibration Isolation Platform Using Magnetorheological Technology

A simulation model with numerical method and optimal control of magneto-rheological shock isolator

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Control and experimental study of 6-DOF vibration isolation platform with magnetorheological damper

Active Vibration Isolation of a Micro-Manufacturing Platform Based on a Neural Network

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

A Six Degrees-of-Freedom Vibration Isolation Platform Supported by a Hexapod of Quasi-Zero-Stiffness Struts

Development of a magnetorheological isolator with variable damping and variable stiffness for broadband vibration suppression

Design and control of helicopter main reducer vibration isolation platform with magnetorheological dampers

Nonlinear passive magnetorheological damping characteristics of the scissor-like isolation platform

Development of a Semi-Active Suspension Using a Compact Magnetorheological Damper with Negative-Stiffness Components

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

System Integration and Control Design of a Maglev Platform for Space Vibration Isolation

Design, Modeling, and Vibration Control of a Damper Based on Magnetorheological Fluid and Elastomer

Development and Experimental Study of a Mixed-Mode Vibration Isolator Using Magnetorheological Elastomer

Semi-active fuzzy cooperative control of vehicle suspension with a magnetorheological damper

Vibration control with an inner-pass magnetorheological damper

Vibration Isolation Optimized Design of Magnetic Suspended Pump