Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

Dynamic End-Effector Trajectory Control for Flexible Micro-Macro Manipulators Using an Ideal Manifold.

End-Effector Robust Trajectory Tracking Control For Flexible Robot Manipulators

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Trajectory Control a Flexible Space Manipulator Utilizing a Macro-Micro Architecture

Dynamic Compensation Control of Flexible Macro–Micro Manipulator Systems

Contraction Theory Based Trajectory Tracking Control of Free-Floating Space Manipulator

Nonlinear Dynamic Analysis and Optimal Trajectory Planning of a High-Speed Macro-Micro Manipulator

Modeling and Control of Flexible Joint Robotic Manipulator

Trajectory tracking control of parallel manipulator with integral manifold and observer

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Task Space Trajectory Control of Flexible Micro–macro Robot in the Presence of Parametric Uncertainty

Workspace Trajectory Tracking Control Of Flexible Joint Robots Based On Backstepping Method

Optimal Trajectory Planning for Manipulators with Flexible Curved Links.

Vibration Control for a Nonlinear Three-Dimensional Flexible Manipulator Trajectory Tracking

Dynamic Modeling and Adaptive Vibration Suppression of a High-Speed Macro-Micro Manipulator

Modeling and Trajectory Tracking Control of a Free-Floating Space Robot with Flexible Manipulators

TRAJECTORY TRACKING CONTROL AND VIBRATION SUPPRESSION OF RIGID FLEXIBLE MANIPULATORS

Dynamic Modeling and Vibration Control for a Nonlinear 3‐dimensional Flexible Manipulator

Vibration Suppression Control Methods for Two-Link Flexible Manipulators

Workspace Adaptive Control of Flexible Robot Arms

Modeling and Variable Structure Control of A Vehicle Flexible Manipulator