Abstract:Carbon nanotubes (CNT) are nano-scale tubular structures which consist of seamless cylindrical shells of graphitic sheets. They were first found by professor Sumio Iijima in the arcdischarge soot between graphite electrodes in 1991 [1]. As a newly discovered carbon allotrope, CNTs have drawn worldwide attentions by their unique electrical, mechanical, and thermal properties. Seven years after their discovery, CNTs were synthesized in the form of arrays by chemical vapor deposition (CVD) [2,3]. For the first time in the history, billions of CNTs were aligned in the vertical direction on a substrate, and their growth position can be controlled by catalyst pattern design [3]. In 2002, we discovered a new type of CNT array, which is named the super-aligned CNT array. This kind of array was composed of clean, straight and defectfree CNTs, and there exist strong Van de Waals forces between adjacent nanotubes. Due to this unique feature, when one picks a strand of CNTs by tweezers or adhesive tapes, continuous long yarns or films can be simply pulled out from the array [4], as shown in figure 1. This discovery had enabled us to produce macroscopic materials with pure CNTs with a quick and easy dry spin process, as shown in figure 2. In 2005, we scaled up the substrate size of the CNT arrays from 1 inch to 4 inches, which could provide CNT films as wide as 10 cm [5]. Figure 1. The mechanism of dry spinning CNT yarns and films from super-aligned CNT arrays. The CNT yarns and films are composed of sparse parallel CNTs along the pulling direction. With the large percent of the vacancy between CNTs, the as drawn films can have transparency up to 90%. Therefore, CNT films can be used as a new type of transparent conductive film which have potential applications in liquid crystal displays and touch panels. The CNT films also have superb flexibility which is desired in flexible IT products. Figure 2. a) Spinning CNT film. b) A SEM image of the CNT film. c) A CNT film shrink into a fiber when passing through a drop of ethanol. d) A SEM image of the CNT fiber.

Fabrication and Properties of Macroscopic Carbon Nanotube Assemblies Transforming from Aligned Nanotubes

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

(Invited) Physics and Applications of Spontaneously Aligned Macroscopic Nanotube Assemblies

Understanding Macroscopic Assemblies of Carbon Nanostructures with Microstructural Complexity

Tuning Carbon Nanotube Assembly for Flexible, Strong and Conductive Films.

Length-dependent carbon nanotube film structures and mechanical properties

Synthesis and physical properties of macroscale carbon nanotube architectures

Cnt Research: From Academic Wonder To Industrial Exploration

Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections

Superaligned Carbon Nanotube Arrays, Films, and Yarns: a Road to Applications.

Macroscopically Self-Aligned and Chiralized Carbon Nanotubes: From Filtration to Innovation

A Mini Review on Nanocarbon-Based 1D Macroscopic Fibers: Assembly Strategies and Mechanical Properties

High-strength Carbon Nanotube Fibers by Twist-Induced Self-Strengthening

Single-Carbon-Nanotube Manipulations and Devices Based on Macroscale Anthracene Flakes

Cover Picture: Fabrication and Electrical and Mechanical Properties of Carbon Nanotube Interconnections (adv. Funct. Mater. 11/2005)

Efficient Fabrication of High-Quality Single-Walled Carbon Nanotubes and Their Macroscopic Conductive Fibers

Fabrication of highly conductive carbon nanotube fibers for electrical application

Self-organized Arrays of Carbon Nanotube Ropes

Torsional Properties of Bundles with Randomly Packed Carbon Nanotubes

High-Strength Carbon Nanotube Fibers from Purity Control by Atomized Catalytic Pyrolysis and Alignment Improvement by Continuous Large Prestraining

Aligned Carbon Nanotube Fiber for Energy Conversion and Storage