Abstract:Synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films. Polyvinyl alcohol (PVA) is a widely used polymer that is biocompatible, nontoxic, and water‐soluble due to the presence of hydroxyl groups in its domain. This study aims to investigate the effects of fumaric acid (FA) cross‐linking and thermal cross‐linking (TC) on the PVA's mechanical and thermal properties. When the FA is mixed with PVA, it was found in the chemical reaction that the OH groups of PVA are condensing with the carboxylic acid units of FA to yield new ester linkages and water as a by‐product, which further results in the reduction of the water absorption capacity. Quantitatively, the addition of 8 (wt. /wt. %) FA resulted in a minimum of 65% water absorption rate, as compared with 117% for pure PVA. The mechanical and thermal properties of PVA also enhanced with the addition of 2% to 8% FA by weight. For the TC case, the % increase in ultimate tensile strength was 30.9% and 42.5% with and without TC, respectively. As the wt. % of FA increased from 2 to 10%, the % elongation value decreased for both with and without TC films relative to pure PVA. The thermogravimetric analysis revealed the change in degradation temperature of FA‐PVA blended film in comparison with pure PVA. Dynamic mechanical analysis was utilized to analyze the viscoelastic nature and temperature variation at the glass transition temperature. The current fabricated film is a potential candidate for the food packaging films application; moreover, the results reported in this investigation will accelerate the industrial applications of biodegradable PVA. Highlights Increasing the weight percentage of fumaric acid leads to an enhancement in mechanical and thermal properties of the film. Esterification is the usual reaction between fumaric acid and polyvinyl alcohol (PVA), in which ester linkages are formed when the carboxyl groups (‐COOH) of fumaric acid and the hydroxyl groups (‐OH) of PVA combine. Water absorption characteristics of the film reduces as the wt. % of fumaric acid increases. Thermal cross‐linking of the film leads to further improvements in mechanical and thermal properties. The overall effect of increasing the wt. % of fumaric acid is negative on the glass transition temperature of the film. The developed film is a potential candidate for the food packaging films application.

Influence of Ammonium Zirconium Carbonate on Properties of Poly(Vinyl Alcohol)/Xylan Composite Films

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Properties of polyvinyl alcohol films reinforced by citric acid modified cellulose nanocrystals and silica aerogels

Enhancing thermal stability and mechanical resilience in gelatin/starch composites through polyvinyl alcohol integration

Enteromorpha cellulose micro-nanofibrils/poly(vinyl alcohol) based composite films with excellent hydrophilic, mechanical properties and improved thermal stability

Synthesis and Characterization of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites

Developing a novel konjac flour/poly-vinyl alcohol composite film: Preparation, properties and characterization

Enhancing Hydrophobicity and Oxygen Barrier of Xylan/PVOH Composite Film by 1,2,3,4-Butane Tetracarboxylic Acid Crosslinking

Enhancing thermal stability, mechanical properties, and flammability of polyvinyl alcohol using amide‐functionalized hydrogel and zinc oxide nanoparticles

Influence of Ultrasonication Treatment over Mechanical, Optical and Physiochemical Properties of Polyvinyl-alcohol/cornstarch Biocomposite Films

Mechanical and Thermal Properties Enhancement and Swelling Behavior of Bacterial Cellulose/Collagen/Polyvinyl Alcohol Nanofiber Hydrogel Film

Facile Fabrication of High-Performance Composite Films Comprising Polyvinyl Alcohol as Matrix and Phenolic Tree Extracts

Optimization of crosslinked poly(vinyl alcohol) nanocomposite films for mechanical properties

Investigation of the effects of cellulose nanofiber on the properties of poly(vinyl alcohol) crosslinked by 2,5-furandicarboxylic acid

Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites

Effect of SiO2, PVA and glycerol concentrations on chemical and mechanical properties of alginate-based films

Effect of Length of Cellulose Nanofibers on Mechanical Reinforcement of Polyvinyl Alcohol

Synthesis of Poly(maleic Anhydride-Co-vinyl Chloride) Crosslinked Microspheres and Its Superior Enhancement in Mechanical Strength and Antibacterial Activity for Poly(vinyl Alcohol) Composite Films

Comparative efficacy of citric acid/tartaric acid/malic acid additive-based polyvinyl alcohol-starch composite films

Thermo-mechanically improved polyvinyl alcohol composite films using maleated chitin nanofibers as nano-reinforcement

Suppression of the Skin-Core Structure of Poly(vinyl Alcohol) Films by Adding Urea/Diethanolamine to Improve the Mechanical and Optical Properties