Abstract:Nowadays, separation of heavy metals from polluted wastewater is one of the most important environmental issues, and various methods have been investigated for treating polluted water and industrial wastewater. Surface adsorption using an inexpensive, biodegradable and environmentally consistent adsorbent can be considered an efficient and cost-effective method. One of these adsorbents is sodium alginate (SA). The purpose of this study was to fabricate composite nanofibers using poly (vinyl alcohol) (PVA) and sodium alginate to remove cadmium metal ion from aqueous solutions. For this purpose, polymer solutions consisting of poly (vinyl alcohol) (10% wt)/sodium alginate (2% wt) with three volume ratios of 0/100, 20/80 and 40/60 were first made, and then nanofibers were produced from the resulting solutions by electro-spinning process. The prepared nanofibers were examined by scanning electron microscopy (SEM) and the synthetic poly (vinyl alcohol)/sodium alginate nanofibers at a ratio of 40/60 were selected as adsorbent. The obtained nanofibers were characterized by Fourier-transform infrared spectroscopy (FTIR). The synthesized adsorbent was used to remove the aqueous solution of cadmium metal; the effect of various parameters such as changes in initial metal ion concentration, pH, temperature, contact time and stirring speed on the adsorption process were investigated, and optimum values of the parameters were obtained. The maximum amount of equilibrium adsorption under optimum experimental conditions was 67.05 mg/gr. The Taguchi experiment design method was used to optimize the three effective factors in the cadmium ion adsorption process. The results of the adsorption process were adapted to different adsorption isotherms such as Langmuir and Freundlich isotherms. The fit of the laboratory data to the Langmuir model was better, and the maximum adsorption capacity through this model was obtained equal to 93.163 mg/g of the adsorbent. Since the performance of an adsorbent depends on the duration of the adsorption process, the kinetics of the adsorption process were investigated by pseudo-first-order equation and pseudo-second-order equation. Moreover, the results indicated that the laboratory data showed a better fit to the pseudo-second-order model. Finally, the thermodynamic perspective was examined, and the process was found to be endothermic and spontaneous. The results showed the optimum values for maximum cadmium uptake.

Fe3O4 Nanoparticles Embedded Sodium Alginate/PVP/Calcium Gel Composite for Removal of Cd2

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Synthesis of magnetic sodium lignosulfonate hydrogel(Fe3O4@LS) and its adsorption behavior for Cd2+ in wastewater

ONE-POT SYNTHESIZED FE3O4/PMMA MAGNETIC NANOADSORBENTS FOR FAST CD(II) REMOVAL

Facile preparation of magnetic sodium alginate/carboxymethyl cellulose composite hydrogel for removal of heavy metal ions from aqueous solution

Fe3O4 and TiO2 Embedded Sodium Alginate Beads of Composite Adsorbent for Pb(II) Removal

Porous sodium alginate/cellulose nanofiber composite hydrogel microspheres for heavy metal removal in wastewater

NOVEL MAGNETIC ALGINATE/HYDROXYAPATITE COMPOSITE WITH HIGH-EFFICIENCY CADMIUM-ADSORPTION PERFORMANCE

Dual-use of Sodium Alginate to Prepare Sodium Algenate -Derived Carbon Dots Sodium Algenate Hydrogel Composite for Pb2+ Removal

Fabrication of nanofibers using sodium alginate and Poly(Vinyl alcohol) for the removal of Cd2+ ions from aqueous solutions: adsorption mechanism, kinetics and thermodynamics

Combined Performance of Hydroxyapatite Adsorption and Magnetic Separation Processes for Cd(II) Removal from Aqueous Solution

Adsorption of Pb(II) from Aqueous Solutions Using Nanocrystalline Cellulose/Sodium Alginate/K-Carrageenan Composite Hydrogel Beads

Magnetic Chitosan/sodium Alginate Gel Bead As a Novel Composite Adsorbent for Cu(II) Removal from Aqueous Solution

Encapsulating Fe3O4 into Calcium Alginate Coated Chitosan Hydrochloride Hydrogel Beads for Removal of Cu (II) and U (VI) from Aqueous Solutions.

Synthesis of Mesoporous Silica-Calcium Phosphate Hybrid Nanoparticles and Their Potential As Efficient Adsorbent for Cadmium Ions Removal from Aqueous Solution

Novel Magnetic Polysaccharide/graphene Oxide @fe3o4 Gel Beads for Adsorbing Heavy Metal Ions.

A Novel Magnetic Fe3O4/cellulose Nanofiber/polyethyleneimine/thiol-Modified Montmorillonite Aerogel for Efficient Removal of Heavy Metal Ions: Adsorption Behavior and Mechanism Study

Gellan Gel Beads Containing Magnetic Nanoparticles: an Effective Biosorbent for the Removal of Heavy Metals from Aqueous System

Efficient Elimination of Inorganic/Organic Pollutants by Fe3O4/biochar@sodium Alginate Gel Beads

Adsorption, Reclaim, and Regeneration of Cd by Magnetic Calcium Dihydrogen Phosphate Nanoparticles

Xanthate-Modified Magnetic Fe3O4@SiO2-Based Polyvinyl Alcohol/Chitosan Composite Material for Efficient Removal of Heavy Metal Ions from Water