Abstract:Yttria-stabilized zirconia (YSZ) is a fine ceramics material that has been applied to dental implants and mechanical components. As YSZ is a hard, brittle, and chemically stable material, that undergoes phase transformation during mechanical loading, it is difficult to fabricate nanostructures using mechanical processing methods. In this study, a surface structuring method using a femtosecond pulsed laser was proposed, which is effective in suppressing the mechanical loading-induced phase transformation. As the material properties of YSZ vary with the concentration of yttria dopant , polycrystalline zirconia samples with different yttria concentrations (2, 3, 5, and 8 mol%) were used to investigate the effect of yttria concentrations on laser processing characteristics for nanostructuring. At all concentrations, nanopore generation in the surface grain was achieved by laser irradiation near the ablation threshold. In addition, there was no significant change in the crystal structure before and after laser irradiation, and no damage to the bulk occurred. At 2 mol%, intergranular cracks were generated around the pores. By increasing the dopant level to 5 mol%, the lens effect of the crystal grains became stronger due to enhanced grain growth, and the diameter and number of pores increased. In addition, pores formed preferentially on smaller grains at 5 mol%. However, for YSZ with 8 mol%, the pore formation phenomenon was different from that in the lower dopant level, as the area near the grain boundary was preferentially ablated, and microcracks formation and exfoliation of the surface also occurred. These results contribute to a deeper understanding of the laser ablation characteristics of zirconia with different dopant levels and to the development of surface structuring methods for fine ceramics materials.

Phase stability, grain growth and photoluminescence property of nanocrystalline yttria-stabilized zirconia film under 500keV Xe 6+ ion irradiation

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Formation and Rate Processes of Y2o3 Stabilized Zro2 Thin Films from Zr(Dpm)(4) and Y(Dpm)(3) by Cold-Wall Aerosol-Assisted Mocvd

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Study of Xe+-irradiation Effect on Yttria-Stabilized Zirconia Single Crystals

Influence of Xe+ ion implantation on spectral properties of yttria-stabilized zirconia single crystals

Enhanced Structural Stability of Nanoporous Zirconia under Irradiation of He

Damage Evolution of Yttria-Stabilized Zirconia Induced by He Irradiation

Grain Growth Characteristics of Hydrothermally Prepared Yttria Stabilized Zirconia Nanocrystals during Calcination

Lattice damage and secondary phase formation in yttria stabilised zirconia implanted with Fe at different temperatures

Effects of He Irradiation on Yttria-Stabilized Zirconia Ceramics

Agenesis of the corpus callosum in a mother and son.

Microstructural modifications induced in Si+-implanted yttria-stabilised zirconia: a combined RBS-C, XRD and Raman investigation

Grazing‐incidence synchrotron radiation diffraction studies on irradiated Ce‐doped and pristine Y‐stabilized ZrO2 at the Rossendorf beamline

Microstructures and Optical Properties of Nanocrystalline Rare Earth Stabilized Zirconia Thin Films Deposited by a Simple Sol–gel Method

From zirconia to yttria: Sampling the YSZ phase diagram using sputter-deposited thin films

Few-monolayer yttria-doped zirconia films: Segregation and phase stabilization

Role of temperature in the radiation stability of yttria stabilized zirconia under swift heavy ion irradiation: A study from the perspective of nuclear reactor applications

Effect of dopant concentration on femtosecond pulsed laser irradiation of yttria-stabilized zirconia for generating nanopores

Preparation of epitaxial yttria-stabilized zirconia with non-quilibrium t' phase and ferroelastic domain by pulsed laser deposition

Long Time Annealing Effects on the Microstructures of the Sol–gelderived Nanocrystalline Thin Films of Rare Earthstabilized Zirconia