Abstract:Structural materials of the new generation of nuclear reactors, fission as well as fusion, must often cope with high production rates of transmutation helium. Their testing hence requires either a powerful source of fast neutrons or a high-fluence ion-irradiation facility providing sufficient amounts of high-energy helium to investigate its effect on the material. Most ion irradiation studies, however, concentrate on basic effects such as defect evolution or bubble swelling in narrow near-surface regions modified by ion bombardment. Studies on bulk samples with a relatively thick implanted region, which would enable, for instance, micromechanical testing, are underrepresented. This gap might be filled by high-fluence multi-energy ion irradiations modifying several tens of micrometres of the investigated substrate. High-energy ion accelerators providing reasonable currents with energies of tens of MeV are rarely employed in such studies due to their scarcity or considerable beamtime costs. To contribute to this field, this article reports a unique single-beam He implantation experiment aimed at obtaining quasi-uniform displacement damage across >60 μm with the He/dpa ratio roughly one order of magnitude above the typical spallation neutron target irradiation conditions. Some technical aspects of this irradiation experiment, along with recent developments and upgrades at the 6 MV Tandetron accelerator of the Slovak university of technology in Bratislava, are presented.

New Ion Beam Materials Laboratory for Materials Modification and Irradiation Effects Research

Development of the Special Beam Line at HI 13 Tandem Accelerator for Irradiation of Nuclear Track Membrance

An accelerator facility for intermediate energy proton irradiation and testing of nuclear materials

Studies of material properties under irradiation at BNL Linear Isotope Producer (BLIP)

Current status and future developments of the ion beam facility at the centre of micro-analysis of materials in Madrid

Development of Single-ion Microbeam at Fudan University

Incident beamline design for a modern cold triple axis spectrometer at the High Flux Isotope Reactor

Short intense ion pulses for materials and warm dense matter research

Design of a Beam Line for Simultaneous Dual-Beam Ion Implantation

A New Methodology for Radiation Effects Studies in Solids using the Plasma Focused Ion Beam

High-Fluence Multi-Energy Ion Irradiation for Testing of Materials

rf improvements for Spallation Neutron Source H- ion source

LET calibration of ion microbeams and their SEE cross-section characterisation

A new system for sample synthesis, preparation and modification combined with in-situ depth profiling using medium energy ions

Preliminary Design of a Hybrid Ion Source for 7li3+ Generation

Preliminary beam formations after the upgrade of the TIARA two microbeam systems

Ion Source Development and Radiobiology Applications Within the LIBRA Project

Understanding radioactive ion beam production at ISAC through yield measurements and simulations

Production of rare isotope beams at the Texas A&M University Cyclotron Institute

Twenty Kilovolts Massive Ion Beam System for Well-Defined Microcluster Studies