Abstract:Background: the clinical application of orthopedic or dental implants improves the quality of the lives of patients. However, the long-term use of implants may lead to implant loosening and related complications. The purpose of this study is to deposit titanium (Ti)-niobium (Nb)-zirconium (Zr)-tantalum (Ta) alloys on the surface of Ti-6Al-4V to increase structural strength and biocompatibility for the possible future application of implants. Materials and methods: Ti, Nb, Zr, and Ta served as the materials for the surface modification of the titanium alloy. TiNbZr and TiNbZrTa coatings were produced using cathodic arc evaporation, and a small amount of nitrogen was added to produce TiNbZrTa(N) film. Annealing and oxidation were then conducted to produce TiNbZrTa-O and TiNbZrTa(N)-O coatings. In this study, biological tests and finite element analyses of those five alloy films, as well as uncoated Ti-6Al-4V, were performed. Human osteosarcoma cells (MG-63) and mouse fibroblast cells (L-929) were used to analyze cytotoxicity, cell viability, and cell morphology, and the bone differentiation of MG-63 was evaluated in an alkaline phosphatase experiment. Furthermore, for measuring the gene expression level of L-929, reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) was conducted. The three-dimensional (3D) computational models of the coated and uncoated sample films were constructed using images of transmission electron microscopy and computer-aided design software and, then, the stress distributions of all models were evaluated by finite element analysis. Result: the cytotoxicity test revealed that the surface treatment had no significant cytotoxic effects on MG-63 and L-929 cells. According to the results of the cell viability of L-929, more cell activity was observed in the surface-treated experimental group than in the control group; for MG-63, the cell viability of the coated samples was similar to that of the uncoated samples. In the cell morphology analysis, both MG-63 and L-929 exhibited attached filopodia and lamellipodia, verifying that the cells were well attached. The alkaline phosphatase experiment demonstrated that the surface treatment did not affect the characteristics of early osteogenic differentiation, whereas RT-qPCR analysis showed that surface treatment can promote better performance of L-929 cells in collagen, type I, α1, and fibronectin 1. Finally, the results of the finite element analysis revealed that the coated TiNb interlayer can effectively reduce the stress concentration inside the layered coatings. Conclusions: TiNbZrTa series films deposited using cathodic arc evaporation had excellent biocompatibility with titanium alloys, particularly in regard to soft tissue cells, which exhibited an active performance. The finite element analysis verified that the TiNb interlayer can reduce the stress concentration inside TiNbZrTa series films, increasing their suitability for application in biomedical implants in the future.

Characterization and mechanical investigation of Ti–O 2− x film prepared by plasma immersion ion implantation and deposition for cardiovascular stents surface modification

The Characterization and Osteogenic Activity of Nanostructured Strontium-Containing Oxide Layers on Titanium Surfaces

Fabrication and Biological Evaluation of the Coating Co‐doped Strontium and Zinc Nanoparticles on Porous Pure Titanium Surface by Hydrothermal Method

The Mechanical and Electrochemical Stability of Trimethysilane Plasma Nanocoatings Deposited onto Cobalt Chromium Cardiovascular Stents

Preparation, Characterization, and Bioactivities of Cobalt, Strontium and Fluorine Co-Doped Oxide Films on Titanium Surface for Clinical Application

Fabrication of Ti-O Gradient Biomedical Film on Ti6al4v by Dc Glow Plasma Oxidizing

Study on a Novel Vascular Stent Material (titanium Oxide, Ti-O) Coated with Albumin and Heparin: is It Hemocompatible with Fibrinogen

The effect of coimmobilizing heparin and fibronectin on titanium on hemocompatibility and endothelialization.

Electrochemical and in vitro biological behaviors of a Ti-Mo-Fe alloy specifically designed for stent applications

Surface modification of LTI carbon by titanium oxide coating synthesised by ion beam

Surface Coloration And Electrochemical Impedance Spectroscopy Characterization Of Oxygen Plasma Implanted Orthopaedic Titanium Alloys

In-situ construction of the nanostructured TiO 2 /TiN composite films by induction heat treatment: Improved mechanical, corrosion, and biological properties

Surface Characteristics, Mechanical Properties, and Cytocompatibility of Oxygen Plasma-Implanted Porous Nickel Titanium Shape Memory Alloy

Covalent grafting of zwitterion polymer and REDV peptide onto NiTi alloy surface for anticoagulation and proendothelialization

Surface Modifications by Both Anodic Oxidation and Ion Beam Implantation on Electropolished Titanium Substrates

Zwitterionic coating assisted by dopamine with metal-phenolic networks loaded on titanium with improved biocompatibility and antibacterial property for artificial heart

Effect of TiC Nanoparticles on a Zn-Al-Cu System for Biodegradable Cardiovascular Stent Applications

Novel Mussel-Inspired Ti-6Al-4V Surfaces with Biocompatibility, Blood Ultra-Drag Reduction and Superior Durability

Biocompatibility and Microstructure-Based Stress Analyses of TiNbZrTa Composite Films

Strontium-calcium doped titanium dioxide nanotubes loaded with GL13K for promotion of antibacterial activity, anti-Inflammation, and vascularized bone regeneration

Plasma-synthesised carbon-based coatings for cardiovascular applications