Abstract:The aim and function of the synthetic model ice is described in this paper. In according to the requirement of simulation law of ice interaction with structures, strength and thickness of model ice should follow simulating scale, λ. The statistical values of the Bohai ice feature parameters, such as density, compressive strength, flexural strength, shear strength, elastic modulus and friction coefficient, are available. The ideal physi-cal and mechanical values of the synthetic modelice are determined using the model scale of 1∶10～1∶30, considering the capability of the test basins in China and the natural ice features. A perfect model ice is found and called DUT-1 model ice. Its components and making process are introduced briefly in this paper. Flexural strength is one of the important parameters in the evaluation of interaction between ice and slope structures or waves. Hence, it is one of the simulated parameters in model ice. For knowing the flexural strength of DUT-1 model ice in detail, over 500 samples were tested systematically. It is found that ductile bending happens under a loading rate less than 350～400 kPa·s -1 in simple three point bending and 60～65 kPa·s -1 in cantilever beam bending. Their corresponding failure times are 0.03 ～ 0.38 s and 0.5 ～ 0.76 s, respectively. These failure times are in the range of that of the simulated natural ice. A comparison of flexural strength between downwards and up-wards loading on cantilever beams certifies an anisotropy in the model ice. This is the same with the fine grain frozen model ice, because both are characterized by granular structure. After one hour wetting, the flexural strength of the model ice under three-point is going to be steady and lasts for 4 h. This period is longer enough for performing model test for ice interaction with structure or ice behavior modeling test. Similar with natural ice, the flexural strength of the DUT-1 model ice increases with increasing of wetted density. The flexural strengths both under the three-point bending and the cantilever beam bending are almost the same. In the normal distribution curves of strengths, the scatter is rather large of that under the three-point bending. The flexural strength ranges from 35 to 65 kPa, with a middle value of 45 kPa. The flexural strength of the Bohai natural ice is 450～750 kPa, thus model of 1∶10～1∶30 scale is available.

Flexural Strength and Effective Modulus of Large Columnar-Grained Freshwater Ice

Experimental Technique for Ice under Dynamic Compressive Loading

Bending Strength and Effective Modules of Songhua River Ice

Investigations on Flexural Strength of a Columnar Saline Model Ice under Circular Plate Central Loading

Uniaxial Compressive Strength and Fracture Mode of Lake Ice at Moderate Strain Rates Based on a Digital Speckle Correlation Method for Deformation Measurement

Experimental Study of the Fracture Toughness of Natural Freshwater Ice

Experimental Study on Flexural Strength and Effective Elastic Modulus of Granular Ice in the Bohai Sea, China

Experimental Study on the Mechanical Properties of the Songhua River Ice

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Experimental Study on Uniaxial Compressive Strength of Reservoir Ice

Method for Testing Shear and Tensile Strengths of Freshwater/Seawater Ice

Experimental studies on elastic modulus and flexural strength of sea ice in the bohai sea

Influence of the Loading Direction on the Uniaxial Compressive Strength of Sea Ice Based on Field Measurements

Laboratory-scale mixed-mode I/II fracture tests on columnar saline ice

EXPERIMENTAL STUDY ON THE FLEXURAL STRENGTH OF FINE GRAIN ETHANOL MODEL ICE

Thickness-independent fracture in columnar freshwater ice: An experimental study

Experimental investigation on mechanical properties and failure mechanism of rock-like specimens containing an arc-shaped ice-filled flaw under uniaxial compression

Experimental and Numerical Study of the Uniaxial Compressive Strength of Ice with Initial Fibrous Pore: Effects of Temperature and Loading Rate

Dynamic Mechanical Behaviors of Ice at High Strain Rates

Flexural characteristics of artificial ice in winter sports rinks: experimental study and nondestructive prediction based on surface hardness method

Flexural Strength of DUT-1 Synthetic Model Ice