Abstract:The surface texture of the wearing course on asphalt mixtures is the critical factor affecting the friction behaviors of pavement. The present traditional surface structure evaluation index does not provide the range and the distribution of the texture, and most pavement texture polishing equipment does not represent the actual loading action. In this paper, based on a laser profilometer and a spectral analysis, the mean profile depth (MPD) characterizing the pavement macro-texture is calculated, and the spectral parameter (LTX,1–31.5) characterizing the range and the distribution of the road surface texture is derived. MLS11 equipment is used to polish the wearing course with different design parameters, and the evolution characteristics and influencing factors of the surface texture are studied. The results show that the MPD and the LTX,1–31.5 could distinguish the influence of the oil–stone ratio and the mixture type on the surface macro-structure of the asphalt mixture, and the results of the variation coefficient of the parallel test are within 3.0%. The decay process of the MPD can be divided into three processes (i.e., the relative decay period, the decay period, and the stable period) and six stages. The decay process of the LTX,1–31.5 involves the three processes (the relative stable period, the decay period, and the stable period) and four stages. When the oil–stone ratio increases from 4.4% to 5.4%, the attenuation rates of the MPD and the LTX,1-31.5 decrease. The surface texture of both the GAC-16 and SAS-16 samples are better compared with the AC-16 sample, and the attenuation law of the MPD and the LTX,1-31.5 value is similar. The loss rates of the MPD of the four aggregates are ranked as follows: limestone > diabase > andesite > granite. The loss rates of the LTX,1-31.5 of the four aggregates are ranked as follows: limestone > diabase > granite > andesite.

A study of the laboratory polishing behavior of granite as road surfacing aggregate

Wear Behaviors of Pcd Tools in Turning Granite

Influence of diamond wheel grinding process on surface micro-topography and properties of SiO2/SiO2 composite

Evolution of texture and skid resistance change of high-friction surface due to differential-polishing undergoing simulated traffic wear

Experimental analysis and modeling of micro-texture and vickers hardness impact on polished stone value in high-friction aggregates

Evolution characteristics of the surface texture of the wearing course on asphalt pavement based on accelerated pavement polishing

Effect of Aggregate Properties on Long-Term Skid Resistance of Asphalt Mixture

Effect of surface polishing on the tribological performance of hard coatings under lubricated three-body abrasive conditions

Study on the mechanical properties and microscopic evolution mechanisms of weathered granite soil

Characterization of Road Surface Topography Changes During Polishing Process with Characteristic Roughness Parameter

Study on the Skid Resistance Deterioration Behavior of the SMA Pavement

Comparison of the Polishing Resistances of Concrete Pavement Surface Textures Prepared with Different Technologies Using the Aachen Polishing Machine

Dependence of Wear Behaviors of Hardmetal Yg8b on Coarse Abrasive Types and Their Slurry Concentrations

Study on grain removal characteristics and influencing factors of polycrystalline tungsten during polishing process

Study on shear characteristics and a mechanics model of granite residual soil–rock interface

Studies on Stress-Strain Features of Structured Granite Residual Soil

Evaluation of the Factors Affecting the Wear Resistance of Calcined Bauxite Aggregates

Microscopic Evolution of Pore Characteristics and Particle Orientation of Granite Residual Soil in One-Dimensional Compression

INFLUENCE OF SURFACE POLISHING ON THE FRICTION BEHAVIORS OF NBR

The Deterioration Characteristics and Mechanism of Polishing Pads in Chemical Mechanical Polishing of Fused Silica

A study on mechanism of sapphire polishing using the diamond abrasive by molecular dynamics