Abstract:Layered double hydroxide (LDH) nano- and microstructures with controllable size and morphology have been fabricated on "bivalent metal" substrates such as zinc and copper by a one-step, room-temperature process, in which metal substrates act as both reactants and supports. By manipulating the concentration of NH3 center dot H2O, the thickness and lateral size of the LDH materials can be tuned from several tens of nanometers to several hundreds of nanometers and from several hundreds of nanometers to several micrometers, respectively. This method is general and may be readily extended to any other alkali-resisted substrate coated with Zn and Cu. As an example, Zn-covered stainless steel foil has been shown to be effective for the growth of a Zn-Al LDH film. After calcinating the as-grown LDH at high temperature (650 degrees C) in argon gas, a ZnO/ZnAl2O4 porous nanosheet film is obtained, which is then directly used for the first time as the anode material for Li-ion batteries with the operating voltage window of 0.05-2.5 V (vs. Li). The result demonstrates that ZnO/ZnAl2O4 has higher discharge and charge capacities and considerably better cycling stability compared to pure ZnO (Li insertion/extraction rate: 200 or 500 mA g(-1)). The improved electrochemical performance can be ascribed to the buffering effect of the inactive matrix ZnAl2O4 by relieving the stress caused by the volume change during charge-discharge cycling. This Work represents a successful example for the development of promising ZnO-based anode materials for Li-ion batteries.

The Fabrication and Characterization of Zn5(CO3)2(OH)6 As a New Anode Material for Lithium Ion Batteries

Porous Znco2o4 Nanowires Synthesis Via Sacrificial Templates: High-Performance Anode Materials Of Li-Ion Batteries

Green and Facile Synthesis of Porous ZnCO3 As a Novel Anode Material for Advanced Lithium-Ion Batteries

Simple One-Pot Synthesis of Hexagonal ZnO Nanoplates As Anode Material for Lithium-Ion Batteries

Hydrothermal synthesis of nano spheroid‐like ZnMn 2 O 4 materials as high‐performance anodes for lithium‐ion batteries

Atomic Layer Deposition of ZnO on Carbon Black As Nanostructured Anode Materials for High-Performance Lithium-Ion Batteries

Synthesis and Characterization of ZnFe$lt;inf$gt;2$lt;/inf$gt;O$lt;inf$gt;4$lt;/inf$gt; Anode for Lithium Ion Battery

A study on the properties of hexagonal Zn3(OH)2V2O7·2H2O as cathode material for zinc-ion battery

Layered Double Hydroxide Nano- and Microstructures Grown Directly on Metal Substrates and Their Calcined Products for Application as Li-Ion Battery Electrodes

Atomic Layer Deposition of ZnO/TiO2 Nanolaminates As Ultra-Long Life Anode Material for Lithium-Ion Batteries

Layered Ni0.22V2O5·nH2O as high-performance cathode material for aqueous zinc-ion batteries

In Situ Synthesis of ZnO/Porous Carbon Microspheres and Their High Performance for Lithium‐Ion Batteries

Facile Synthesis of Carbon-Coated Zn2SnO4 Nanomaterials As Anode Materials for Lithium-Ion Batteries

Electrochemical Performances of Ni-Coated ZnO As an Anode Material for Lithium-Ion Batteries

Carbon-coated ZnO mat passivation by atomic-layer-deposited HfO2 as an anode material for lithium-ion batteries

Synthesis and Electrochemical Investigation of Highly Dispersed ZnO Nanoparticles As Anode Material for Lithium-Ion Batteries

Nano-Particle Assembled Porous Core-Shell Znmn2o4 Microspheres With Superb Performance For Lithium Batteries

Zn0.52V2O5−a⋅1.8 H2O Cathode Stabilized by in Situ Phase Transformation for Aqueous Zinc‐Ion Batteries with Ultra‐Long Cyclability

Chitosan-Assisted Fabrication of a Network C@V 2 O 5 Cathode for High-Performance Zn-Ion Batteries

Hydrothermal Synthesis of Zn3(OH)2V2O7·nH2O Nanosheets and Its Application in Lithium Ion Battery

Porous ZnMn2O4 Microspheres As a Promising Anode Material for Advanced Lithium-Ion Batteries