Abstract:Silica‐filled styrene‐butadiene rubber with various particle sizes. Silica is a renewable resource that has become the primary filler for the rubber used in eco‐friendly tires. However, silica tends to agglomerate in the rubber matrix, particularly, micro‐ and nano‐scale silica, which limits its application. When ordinary‐particle‐size silica with low cost and high stacking density is modified using appropriate methods, high dispersion in rubber and good performance can be achieved with common processing equipment, which has significant engineering application value. In this study, silica particles with different sizes (nano‐scale, 19 and 45 μm) were treated with a 3‐mercaptopropyltriethoxysilane coupling agent (KH580). Subsequently, the silica with the ordinary particle size of 300 mesh (45 μm) was coated with natural latex (NL), and the mechanical properties of the modified silica‐filled styrene‐butadiene rubber (SBR)/carbon black (CB) compounds were investigated. The results revealed that the mechanical properties of the NL‐coated 45 μm silica‐filled composite improved significantly, particularly, in the area of tear strength and elongation at break, the composite properties were improved by 17.1% and 118.2%, respectively. Excellent performance over composites filled with coupling agent‐treated micron‐ and nanoscale silica. Enhancing the surface modification of silica through latex coating provides a means to improve the efficiency of industrial production and reduce costs. Highlights The low‐fine silica treated with KH580 has good dispersibility. Improved mechanical compatibility of NL‐coated silica with rubber. Improvement in strain performance of composites after NL coated with silica. The effect of silica dispersion on composite properties is greater than the effect of particle size. Industrial silica can be successfully addressed, paving the way for extensive utilization.

Surface modification of silica with N -cyclohexyl-2-benzothiazole sulfenamide for styrene–butadiene rubber composites with dramatically improved mechanical property

Enhancing Interfacial Interaction and Mechanical Properties of Styrene-Butadiene Rubber Composites Via Silica-Supported Vulcanization Accelerator

Surface Modification of Halloysite/Sericite

Significantly Improved Rubber-Silica Interface Via Subtly Controlling Surface Chemistry of Silica

Enhanced Mechanical and Processing Property of Styrene-butadiene Rubber Composites with Novel Silica-supported Reactive Processing Additive

Enhancing Mechanical Properties of Styrene–butadiene Rubber/silica Nanocomposites by in Situ Interfacial Modification with a Novel Rare-Earth Complex

Catalyzed Silanization by Supporting Ceria on Silica Towards Rubber Composites with Improved Mechanical Properties

Improving the mechanical and abrasion properties of silica-reinforced styrene-butadiene rubber composites by optimizing the concentrations of compatibilizers

Preparation of Halloysite Nanotubes–Silica Hybrid Supported Vulcanization Accelerator for Enhancing Interfacial and Mechanical Strength of Rubber Composites

Structural and Mechanical Properties of Styrene–butadiene Rubber/silica Composites with an Interface Modified In-Situ Using a Novel Hindered Phenol Antioxidant and Its Samarium Complex

Effect of silica particle size and coating by natural latex on properties of styrene‐butadiene rubber/carbon black/silica composites

Effect of nano-silica surface-capped by bis[3-(triethoxysilyl)propyl] tetrasulfide on the cure behaviors, mechanical properties, swelling resistance and microstructure of styrene-butadiene rubber/acrylonitrile-butadiene rubber nanocomposites

A facile and green preparation of nanosilica-supported antioxidant and its reinforcement and antioxidation effect on styrene-butadiene rubber

Use of Naturally Small Molecule As an Intelligent Interfacial Modifier for Strengthening and Toughening Silica-Filled Rubber Composite

Surface Modification of Silica by Two-Step Method and Properties of Solution Styrene Butadiene Rubber (SSBR) Nanocomposites Filled with Modified Silica

Reinforcing Styrene‐butadiene Rubber Composites by Constructing Multiple Interaction Between Rubber and Silica

Reinforcement and Antioxidation Effects of Antioxidant Functionalized Silica in Styrene–butadiene Rubber

Improved Thermal Insulation and Mechanical Strength of Styrene-Butadiene Rubber through the Combination of Filled Silica Aerogels and Modified Glass Fiber

Synthesis and characterization of 3-benzothiazolthio-1-propyltriethoxylsilane and its reinforcement for styrene-butadiene rubber/silica composites

A Novel Strategy to Functionalize Styrene Butadiene Rubber Toward Enhanced Interfacial Interaction with Silica

Effects of modified silica on the co‐vulcanization kinetics and mechanical performances of natural rubber/styrene–butadiene rubber blends