Abstract:Flexible, lightweight, and large-area solar cells provide new power supply opportunities in the renewable energy field and facilitate the supply of power to internet-of-things devices and wearable devices. The choice of printing process technologies is a key parameter for such flexible power sources because of their energy-saving process technology and high throughput rate. In addition to selecting the appropriate printing method for the active and charge transport layers, the development of printed electrodes is critical. Numerous printable materials have been developed to replace conventional evaporated top electrodes. However, achieving fully solution-processed organic photovoltaics (OPVs) with power conversion efficiency (PCE) comparable to OPVs with vacuum-deposited transparent and top electrodes is challenging. This is because of the difficulty of forming a uniform interface between the top solution-processed electrode and the active layers while preventing deterioration. In this study, an electron transport layer-free, eutectic gallium–indium (EGaIn) top-cathode strategy was developed and a record PCE of 12.7% in fully solution-processed, flexible OPVs was achieved. Direct coating of EGaIn on the active layer, in a nitrogen atmosphere, is conducive for energy band matching and obtaining physically perfect interfaces without any penetrations or voids. An average PCE of 14.1% and enhanced operating stability, comparable to conventional OPVs, were achieved with indium tin oxide transparent electrodes by eliminating the electron-transport layer. The fully solution-processed flexible OPVs fabricated with the embedded silver nanowire strategy in ultrathin transparent polyimide, achieved an average PCE of 12.7%, representing a promising technique to meet green and high-throughput energy demands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24235.Detailed performance of OPVs with different structures; detailed MPP operation stability and storage stability of OPVs with different structures; fabrication process of fully solution-processed OPVs; and characterizations of the transparent electrodes (PDF)This article has not yet been cited by other publications.

Ito-Free Large-Area Flexible Organic Solar Cells with an Embedded Metal Grid

Flexible Silver Grid/Pedot:Pss Hybrid Electrodes for Large Area Inverted Polymer Solar Cells

12.42% Monolithic 25.42 cm 2 Flexible Organic Solar Cells Enabled by an Amorphous ITO‐Modified Metal Grid Electrode

Printed Light-Trapping Nanorelief Cu Electrodes for Full-Solution-Processed Flexible Organic Solar Cells

Flexible ITO‐Free Organic Photovoltaics on Ultra‐Thin Flexible Glass Substrates with High Efficiency and Improved Stability

Toward Highly Efficient Large-Area ITO-Free Organic Solar Cells with a Conductance-Gradient Transparent Electrode.

54 cm 2 Large‐Area Flexible Organic Solar Modules with Efficiency Above 13%

Ultra‐Thin Flexible ITO‐free Organic Solar Cells with Gradient Bilayer Electron Transport Materials

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

High‐Efficiency ITO‐Free Organic Photovoltaics with Superior Flexibility and Upscalability

Individualized 6‐mercaptopurine increments in consolidation treatment of childhood acute lymphoblastic leukemia: A NOPHO randomized controlled trial

Large-area flexible organic solar cells

Flexible indium zinc oxide/Ag/indium zinc oxide multilayer electrode grown on polyethersulfone substrate by cost-efficient roll-to-roll sputtering for flexible organic photovoltaics

Design of Charge Transporting Grids for Efficient ITO-free Flexible Up-Scaled Organic Photovoltaics

Complete Solution-Processed Semitransparent and Flexible Organic Solar Cells: A Success of Polyimide/Ag-Nanowires- and PH1000-Based Electrodes with Plasmonic Enhanced Light Absorption

Enhancing the Efficiency of Flexible, Large‐Area, ITO‐Free Organic Photovoltaic Devices

Solution-Processed Electron-Transport Layer-free Organic Photovoltaics with Liquid Metal Cathodes

Semitransparent Organic Solar Cells With Hybrid Monolayer Graphene/Metal Grid As Top Electrodes

Toward Low-Cost, High-Efficiency, and Scalable Organic Solar Cells with Transparent Metal Electrode and Improved Domain Morphology

High‐Performance Upscaled Indium Tin Oxide–Free Organic Solar Cells with Visual Esthetics and Flexibility