Abstract:Metallic solid-liquid phase change materials (SLPCMs) are crucial for the thermal energy storage technology of various industrial systems. However, the encapsulation of metallic SLPCMs is still technically difficult. In this pursuit, the present research envisaged the development of a novel technology to successfully prepare the core ( = Al-Si/Bi)/void/shell( =Al2O3) composite SLPCMs by using Al/Bi immiscible alloy powders as starting material and tetraethoxysilane as SiO2 source. The Al-Si alloy and Al2O3 shell were in-situ synthesized by the displacement reaction between SiO2 and molten Al. Interestingly, most of the Bi distributed in the shell of Al/Bi immiscible alloy powders could not only improve the activity of alloy powders and promote the formation of precursor shell, but also be recycled by evaporation to form the void layer during the calcination process of composite SLPCMs. The produced void layer provided a space buffer to alleviate the volume expansion of the core SLPCM, and thereby improving the thermal cycling stability of the prepared composite SLPCMs. The thermal cycling test results showed that after 300 thermal cycles, the melting latent heat reduction of the core ( = Al-Si/Bi)/void/shell( =Al2O3) composite SLPCMs (24.3-31.7 J/g) was much less than that of the core( = Al-Si)/shell( = Al2O3) composite SLPCM (58.1 J/g). Moreover, the prepared Al-Si/Bi/Al2O3 exhibited an adjustable melting temperature (571.9 degrees C to 631.9 degrees C) and average particle diameter (39.3 mu m to 112.6 mu m), relatively high thermal conductivity [2.068 W(mK)(-1) to 2.966 W(mK)(-1)], and excellent thermal energy storage capacity (209.5 J/g to 278.2 J/g). Thus, the prepared Al-Si/Bi/Al2O3 composite SLPCMs are potential thermal energy storage materials, which can be used to improve the energy efficiency of various industrial systems.

One Step Fabrication of Core-Shell Structures in Immiscible Alloys for Thermal Energy Storage

The Core-Shell Structure of Al70bi11sn19 Immiscible Alloy Particles

Dynamic Evolution Process of Multilayer Core-Shell Microstructures Within Containerlessly Solidifyingfe50sn50immiscible Alloy

Core-shell structure with reversible composition of Al-Bi immiscible alloy particles prepared by pulsated orifice ejection method

A New Concept of Al-Si Alloy with Core-Shell Structure As Phase Change Materials for Thermal Energy Storage

Phase separation and formation of core-type microstructure of Al–65.5 mass% Bi immiscible alloys

Formation of core-type microstructure in Al–Bi monotectic alloys

Novel core/void/shell composite phase change materials for high temperature thermal energy storage

Core-shell Microstructure Formed in the Ternary Fe-Co-Cu Peritectic Alloy Droplet

Liquid–liquid Phase Equilibrium and Core–shell Structure Formation in Immiscible Al–Bi–Sn Alloys

Simulated Evolution Process of Core-Shell Microstructures

Preparation of Al52Sn28Bi20 Particles with Morphology-Controlled Core-Shell Structure by the Pulsated Orifice Ejection Method

Multiple Ultrasounds Assisted Phase Separation and Monotectic Solidification of Liquid Ternary Al81.5Cu14.7Bi3.8 Immiscible Alloy

Liquid Immiscibility and Core-Shell Morphology Formation in Ternary Al–Bi–Sn Alloys

Evolution Mechanism of the Core-Shell to Homogeneous Microstructure in Immiscible Alloy by Semi-Solid Treatment under a High Magnetic Field

One-Step Fabrication of Al/Sn-Bi Core–Shell Spheres Via Phase Separation

Constructing a Core-Shell Structure in Ti-based Alloys with Exceptional Mechanical Properties Through Semi-Solid Sintering

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Liquid Phase Separation and Core–shell Morphology of Al75Bi9Sn16immiscible Alloy

Formation of core-shell-like structure in β-solidified TiAl alloy and its effect on hot workability

Structural and phase change characteristics of inorganic microencapsulated core/shell Al–Si/Al2O3 micro-particles during thermal cycling