Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Numerical Simulation of Plug Discharge with Dissolved Oxygen Convection and Diffusion

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Numerical Modeling of Hydrodynamic Processes of Deep-Sea Hydrothermal Plumes: A Case Study on Daxi Hydrothermal Field, Carlsberg Ridge

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

Numerical Study of Violent Impact Flow Using a CIP-Based Model

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

Three-Dimensional Numerical Simulation of Air Exhausted from Submerged Nozzles

Numerical Simulation of Dissolved Oxygen Supersaturation Flow over the Three Gorges Dam Spillway

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

3-D Numerical Model for Confluence Flow

A Generalized Coupled Level Set/volume-of-fluid/ghost Fluid Method for Detailed Simulation of Gas-Liquid Flows.

Three-Dimensional Numerical Modeling of Large-Scale Free Surface Flows with Heat and Contaminant Transfer in Reservoirs

NUMERICAL SIMULATION OF PLUG NOZZLE FLOWFIELDS AT DIFFERENT AMBIENT PRESSURES

Numerical Simulation for Hazardous Chemical Diffusions in Meandering Channel

Numerical Analysis of an Electroless Plating Problem in Gas–Liquid Two-Phase Flow

Numerical Simulation of Hydrodynamics in Slurry Bubble Column Reactor

Numerical Simulation of Underwater Explosion Bubble with a Refined Interface Treatment

Numerical simulation of 3D vortex flow for folded plate flocculation tank based on FLUENT

Simulation of Exchange Flow Between Open Water and Floating Vegetation Using a Modified RNG K-Ε Turbulence Model

Numerical investigation of the interaction between the moving plate and sediment plume