Abstract:The effect of the Cu additives (0.8 wt%) on strain-induced coarsening of the Laves phase was investigated via the comparison of the Laves phase behavior in the Re-containing steels with the different W and Cu contents during creep and aging at a temperature of 650 °C. The formation of the “Cu”-clusters/precipitates with an average size of 3 nm randomly distributed within the ferritic matrix was revealed in the steel with 0.8% Cu, which gave +(20–50) MPa to the room yield strength compared to the steels with 0.2% Cu. The strengthening mechanism due to the “Cu”-clusters/precipitates was revealed as a linear sum of the chemical effect induced by the creation of a new interface area during the cutting of the dislocation through the particle and the pinning of the glide dislocation by an array of obstacles. During creep and aging, the fine “Cu”-clusters/precipitates were dissolved with the precipitation of the fcc “Cu”-rich phase along the boundaries. The nucleation of the Laves phase on the fcc “Cu”-rich phase along the boundaries was detected, which provided the increase in particle number density during both aging and creep conditions. During aging, the coarsening rate constant of the Laves phase particles in the steel with 0.8% Cu was minimal among all studied steels that was caused by the Cu atoms occupying the favorable positions for segregation along the boundaries. However, during creep, the Laves phase also nucleated on the “Cu”-clusters/precipitates, which led to abnormal precipitation of the Laves phase within the martensitic laths and the accelerated growth of the grain boundary Laves phase particles. The grain boundary Laves phase demonstrated intensive strain-induced coarsening during creep, increasing the value of the coarsening rate constant by one order of magnitude compared to the aged state. This is related to the initiation of the additional diffusion way of W atoms from the Laves phase located within the lath interiors to the grain boundary particles.

Effects of Heterogeneous and Homogenous Laves Phase Precipitation on Creep Rupture Strength of Fe-9Cr-3Co (wt.%) Alloys at 650 °C

A Few Observations on Laves Phase Precipitation in Relation to Its Effects on Creep Rupture Strength of Ferritic Steels Based on Fe–9Cr (wt%) Alloys at 650 °C

Characterisation of Laves Phase Precipitation and Its Correlation to Creep Rupture Strength of Ferritic Steels

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Effect of stress on the nucleation and evolution of Mo-rich Laves phase in 9.5Cr-1.5MoCoVNbNB heat-resistant steel during tensile rupture at 620 °C

M 23C 6-Assisted Laves Phase Growth Mechanism in a Novel 9Cr-3W-3Co-1CuVNbB Steel Under Creep Deformation

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Effect of the Cu additives on strain-induced coarsening of the Laves phase in Re-containing 10% Cr–3% Co martensitic steels

High-temperature strengthening mechanism and thermal stability of Laves phase in ferritic matrix

Effects of Zr on high temperature deformation and dynamic precipitation of laves phase in Fe–13Cr–5Al–2Mo–0.5Nb–0.4Ta alloy

Effect of Cr Incorporation on the Mechanical Properties of HfMoTiZrCr, HfMoNbZrCr, and HfMoNbTiCr Refractory High-Entropy Alloys

Damage mechanism of nickel-based creep-resistant alloys strengthened by the Laves phase at the grain boundary

Effect of Cu-Rich Phase Growth on Creep Deformation of Fe-Cr-Ni-Cu Medium-Entropy Alloy: A Phase Field Study

Phase-field simulation of γ' precipitates rafting and creep property of Co-base superalloys

Investigating The Stress Level Impact On The Creep Rupture Behaviour Of 2195-T84 Al-Li Alloy: Experimental And Constitutive Modelling

Strengthening Of An Al-Containing Austenitic Stainless Steel At High Temperature

On the Cobalt − Tungsten/Chromium Balance in Martensitic Creep Resistant Steels

Phase and grain size inhomogeneity and their influences on creep behavior of Co–Cr–Mo alloy additive manufactured by electron beam melting

Microstructure and Creep Performance of a Multicomponent Co-Based L1 2-Ordered Intermetallic Alloy

Precipitation Behavior of Fe2Nb Laves Phase on Grain Boundaries in Austenitic Heat Resistant Steels

Crystal plasticity phase-field simulation of rafting and creep properties with a continuous change of the mismatch strain in a Co-Al-W superalloy