Abstract:The solution casting process was used to fabricate nanocomposite samples composed of carboxymethylcellulose (CMC), polyvinyl alcohol (PVA), poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) and filled with varied concentrations of nickel oxide nanoparticles (NiO NPs). The effect of NiO nanoparticles on the structural, optical, and electrical properties of the pure CMC/PVA/PEDOT:PSS mixture was studied and discussed. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis revealed that the NiO NPs are cubic in phase and range in size from 10 to 55 nm. The XRD analysis of the incorporated films indicated that the NiO NPs crystallinity increased at expense of the CMC/PVA/PEDOT:PSS composites. Fourier Transform Infrared (FTIR) examination revealed the main absorption vibrational peaks of CMC, PVA, PEDOT:PSS, and Ni-O, whose intensities changed randomly after filling, revealing the intermolecular interaction between the nanocomposite components. The UV and visible range absorption spectra showed a sharp peak around 228 for the pure blend, which can be assigned to the π→π* transition. After being filled with NiO NPs, the nanocomposites produced displayed new peaks at 292 and 422 nm that steadily increased with increasing NiO NPs concentration. The optical energy gap (Eg) was computed, and it was discovered that when the NiO NPs content increased, the Eg decreased (from 4.88 to 4.06 eV). At room temperature and over a wide frequency range, between 10 − 1 and 10 7 Hz, the samples' impedance, AC conductivity, and dielectric qualities were examined. Increased NiO NPs content was seen to gradually enhance dielectric loss (up to 2255), and dielectric constant (up to 311). The AC conductivity of the filled samples is also enhanced and corresponds to Jonscher power law. By analysing impedance components of the Z * , the equivalent electrical circuit for each sample was determined. Because of the considerable improvement in optical and electrical properties, these composite films could compete for usage in optoelectronic applications.

Effect of NiO Nanoparticles on Magnetic Polymer Electrolyte for Dye-Sensitized Solar Cells

Photo-assisted Deposition of Ag Nanoparticles on Branched TiO2 Nanorod Arrays for Dye-Sensitized Solar Cells with Enhanced Efficiency

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Morphology and Properties of NiO Electrodes for P-Dsscs Based on Hydrothermal Method

TiO 2 Nanofibers Doped With NiS as Photoanode to Improve the Photovoltaic Conversion Efficiency of Dye-Sensitized Solar Cells

Enhancement of photocurrent of dye-sensitized solar cell by composite liquid electrolyte including NiO nanosheets.

Photochemical synthesized NiO nanoparticles based dye-sensitized solar cells: a comparative study on the counter lectrodes and dye-sensitized concentrations

Effect of nickel oxide concentration on titanium oxide bilayer photoanode for dye-sensitized solar cell application

The effect of dispersion of TiO 2 nanoparticles on preparation of flexible dye-sensitized photoanodes

Enhanced Performance of Dye Sensitized Solar Cells Through the Incorporation of Al 2 O 3 Nanofillers in Polymer Electrolytes

Analysis of nickel oxide as a counter electrode for dye-sensitized solar cells using OghmaNano software

In-situ Formation of Dispersed ZnO Nanoparticles in Mesoporous Carbon Counter Electrode for Efficient Dye-Sensitized Solar Cells

Effect of modified titanium dioxide photoanode and agarose gel electrolyte on electrochemical studies of dye-sensitized solar cell

The Effect of Different Dopants on the Performance of SnO2‐based Dye‐sensitized Solar Cells

The Influence of NiO Nanoparticles on Structural, Optical and Dielectric Properties of CMC/PVA/PEDOT:PSS Nanocomposites

Impedance analysis of charge transfer upon nickel doping in Tio2-based flexible dye-sensitized solar cell

Electrospun Ytterbium and Europium Ions Co-Doped Stannic Oxide Nanofibers and Application in Dye-Sensitized Solar Cells

Nanoflower-like P-doped Nickel Oxide as a Catalytic Counter Electrode for Dye-Sensitized Solar Cells

A Simple and Efficient Method Using Polymer Dispersion to Prepare Controllable Nanoporous TiO2 Anodes for Dye-Sensitized Solar Cells

Enhancing photovoltaic performance in dye-sensitized solar cells using nanostructured NiS/MoS 2 composite counter electrodes

Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With PbTiO 3 –ZnFe 2 O 4 /TiO 2 Nanofibers