Abstract:Silk fibroin (SF) and polyhydroxyalkanoate (PHA) have received increasing attention in recent years because of their unique biodegradability and biocompatibility. Studies on SF or PHA-based materials that are intended for use as biomaterials have attracted great attention, but few studies have been conducted on SF/PHA composite materials. Poly(3-hydroxybutyrate- co -3-hydroxyvalerate) (PHBV) copolymers with varying ratios of the 3-hydroxyvalerate (HV) component are the most widely used member of PHAs. In this study, SF/PHBV composite nanofibers were prepared by electrospinning. The stability of the mixed solution of SF/PHBV was explored first. Fourier transform infrared (FTIR) spectroscopy was used to study the composition of the precipitates caused by mixing the SF solution with the PHBV solution. The morphology of the electrospun SF/PHBV composite nanofibers was observed by scanning electron microscopy (SEM). The average diameters of the pure PHBV, pure SF, SF/PHBV (the content ratio of solute SF/PHBV (w/w) was 10/1), and SF/PHBV (the content ratio of solute SF/PHBV (w/w) was 4/1) nanofibers were 495.12 ± 82.27, 67.88 ± 14.52, 171.10 ± 40.38, and 149.70 ± 28.57 nm, respectively. To discuss the influence of the electrospinning parameters on the spinning stability and morphology of the electrospun SF/PHBV (10/1) composite nanofibers, a univariate analysis experiment was designed. When the applied voltage was 15 kV, the feeding rate was 0.3 mL/h, and the tip-to-collector distance was 13 cm, the spinning stability, uniformity and formability of the SF/PHBV (10/1) composite nanofibers were excellent. In addition to FTIR analysis, X-ray diffraction (XRD) was also used to explore the structure of the electrospun SF/PHBV composite nanofibers. As the content of PHBV increased, the crystallinity of the SF/PHBV composite nanofibers could be improved. The thermogravimetric analysis (TGA) results indicated that the thermal stability of SF was better than that of PHBV. As the content of PHBV increased, the thermal stability of the SF/PHBV composite nanofibers would decrease.

Fabrication, Characterization and Adsorptive of Human Fibrinogen of HA/PHBV Nano Composite Films

Preparation and characterization of nano-hydroxyapatite/silk fibroin porous scaffolds.

Fabrication and Properties of Poly(L-Lactide)/Nano-Hydroxyapatite Composite Nano-Fibrous Scaffold by a Phase Separation Technique

Fabrication of acid-swollen collagen fiber-based composite films: Effect of nano-hydroxyapatite on packaging related properties

Preparation and Characterization of Nano-Hydroxyapatite/Polyurethane Composite Bio-film

Preparation and Characterization of Nano-Hydroxyapatite/Silk Fibroin Biocomposites

Ultralong hydroxyapatite nanofibers/organics composite film for improving its mechanical property: Effect of proportions

Preparation of Hydroxyapatite-Fibroin Nanocomposites

Study on the Amyloid-like Fibrinogen-based Nanofilm

Characterization and Physical Properties of Electrospun Gelatin Nanofibrous Films by Incorporation of Nano-Hydroxyapatite

Preparation and characterization of nano-hydroxyapatite/poly(vinyl alcohol) hydrogel biocomposite

Fabrication of PHBV/keratin composite nanofibrous mats for biomedical applications

A Novel Approach to Prepare Nano-Hydroxyapatite / Silk Fibroin Composite to Increase Nucleation Sites

Electrospinning, characterization and in vitro biological evaluation of nanocomposite fibers containing carbonated hydroxyapatite nanoparticles.

Biopolymer Composite Nanofibers Electrospun from Regenerated Silk Fibroin and PHBV: Fabrication Method, Morphology and Thermal Stability

Fabrication and Characterization of Fluorohydroxyapatite Nanocrystals/poly(d,l-Lactide) Composite Scaffolds

Preparation and characterization of nano-hydroxyapatite/poly(vinyl alcohol) composite membranes for guided bone regeneration.

Preparation and Properties of Nano-Hydroxyapatite/Gelatin/Poly(vinyl alcohol) Composite Membrane

Preparation and characterization of poly(vinyl alcohol)(PVA)/hydroxyapatite (HA) nanofibrous scaffolds

Fabrication of Hydroxyapatite Nanofiber via Electrospinning as a Carrier for Protein

Surface modification of aligned electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-based scaffold for binding with fibronectin or collagen in vascular tissue engineering