Abstract:Whilst the main focus of metal Additive Manufacturing (AM) aka metal 3D printing has been to produce fully dense parts; the main aim of this research is to use the technology to fabricate metallic permeable parts with controlled porosity characteristics so that they may be used as a high performance, high-pressure and cleanable and therefore "green" reusable filters for various industrial applications. The fusion bed technology, more specifically Direct Metal Printing (DMP) has been utilized to fabricate test parts with porous structure that was later tested for filtration efficiency. In DMP process, the part is built in thin layers with each layer a cross-sectional slice of the shape. This method makes it possible to design and manufacture intricate parts with detailed internal sections that is not always possible with conventional manufacturing methods. The technique also makes it possible to design and manufacture combination of solid and porous sections in one operation or in another word a complete filter assembly to be used straight off the print with no or minimal post processing required. Another advantage of using DMP is the possibility of seamlessly incorporating features like pleats to increase the filtration area, incorporate additional strengthening structures and support structures if required as well as manufacturing a graded media with larger pores on the outside getting finer as you approach the centre. The printing parameters have been selected to achieve optimum combination of tightly controlled pore size range, size distribution and mechanical strength to promote the optimum filtration efficiency and dirt-holding capacity; at the same time maintaining the structural integrity for operation under high pressures, a wide range of flow conditions, operating temperature, and compatibility with a wide range of process fluids. The results from the first round of tests on scaled down samples demonstrated that the fabricated porous metal parts are suitable to be used in a wide range of applications and operating conditions. They are bi-directional in terms of flow and as a result, they are cleanable and reusable. They can be designed to a variety of shapes and sizes with ease and are recyclable if needed. This approach of manufacturing cleanable filters can reduce the demand for new and newly processed materials. In addition, it can reduce production, distribution, and storage costs. Hence less energy usage, less pollution, and less demand for hazardous waste disposal and associated challenges with disposal and the impact on the environment.

A Technological Method to Improve the Filtration Efficiency of Fiber Materials

A FACILE WAY TO PREPARE A SPONGE/CELLULOSE FIBER COMPOSITE AND ITS APPLICATION IN OIL/WATER SEPARATION

Fabrication of High-Flux PTFE Hollow Fiber Membranes Through Nonionic Surfactant Infiltration Coupled with Mussel-Inspired Chemistry Coating

Dynamic pore modulation of contracted carbon fiber filter for wastewater treatment: Filtration performance and in-situ regeneration mechanism

Modifying the Fiber Structure and Filtration Performance of Polyester Materials Based on Two Different Preparation Methods

Morphology Engineering of Protein Fabrics for Advanced and Sustainable Filtration

Utilizing Powder Bed Fusion Additive Manufacturing Technology to Fabricate Parts with Controlled Porosity and Permeability Characteristics for Filtration Applications

Optimization on the performance of fibrous filter through computational fluid dynamic simulation coupled with response surface methodology

A Design of Composite Hollow Fiber Membranes with Tunable Performance and Reinforced Mechanical Strength

Research on the Technique of Multistage Functional Filtration to Repair Black and Odorous Water

Research on the process of preparing fiber filtration membrane by centrifugal blowing electrospinning technology

Fyn Tyrosine Kinase Reduces the Ethanol Inhibition of Recombinant NR1/NR2A but Not NR1/NR2B NMDA Receptors Expressed in HEK 293 Cells

Morphology engineering processed nanofibrous membranes with secondary structure for high-performance air filtration

Designing Scalable Dual-Layer Composite Hollow Fiber Nanofiltration Membranes with Fully Cross-Linked Ultrathin Functional Layer

Adjustable fiber structure design for precise aerosol filtration

Study on Filtration Performance of PVDF/PUL Composite Air Filtration Membrane Based on Far-Field Electrospinning

Using modified raw materials to fabricate electrospun, superhydrophobic poly(lactic acid) multiscale nanofibrous membranes for air-filtration applications

When nanotechnology meets filteration: From nanofiber fabrication to biomimetic design

Improved hydrodynamic properties and enhanced resistance to particle deposition and membrane fouling by millimeter-scale patterned membranes

Improvement of Aerosol Filtering Performance of PLLA/PAN Composite Fiber with Gradient Structure

Antifouling Fibrous Membrane Enables High Efficiency and High-Flux Microfiltration for Water Treatment