Abstract:Condensed mode operation is an important advance in breaking through the heat transfer limitations of olefin polymerization in fluidized bed reactors (FBR). It is well known that gas-liquid-solid (G-L-S) and gas-solid (G-S) zones with temperature gradients exist within the FBR in condensed mode, but little is known about how these zones affect the polymer microstructure of fluidized particles. In this work, we report a class of model copolymers with propylene as the comonomer and evaluated this issue by varying the reactor temperature in time order and the consequent change in phase equilibrium, simulating the temperature switching of the particles between the G-L-S and G-S zones. Temperature switching in both zones resulted in wavy kinetic curves and enhanced polymerization kinetics as compared to the dry mode. The molecular weight of the polymer increases, and the MWD becomes narrower compared to the dry mode. MWD deconvolution results showed that two low molecular weight site types were eliminated in the condensed mode, and temperature switching appears to introduce a novel type of low molecular weight site. Moreover, temperature switching resulted in significantly lower insertion of comonomers regardless of whether it was in condensed mode or dry mode. This work not only elucidates the effects of complex hydrodynamics and temperature switching on polymer microstructure and active sites, but also demonstrates how model copolymers can be used extensively to develop polymer microstructure assessments at the industrial reactor scale.

Exploring the Reaction Heat Controlling and Engineering Scale Law in the Process to Synthesis PPTA Using Low-Temperature Solution Polycondensation

Experimental studies on PPTA synthesized by low-temperature polycondensation in mixed solvent N-methyl pyrrolidone and Calcium Chloride

Effect of Liquid Nitrogen Addition on Synthesis of Poly(p-phenylene Terephthalamide)

Research on preparation of poly(1, 4-phenylene-terephthalamide) with in-situ phase transition aided heat transfer and its engineering scale study

Progress in the Research and Development of P-Xylene Liquid Phase Oxidation Process

Effects of Crystallization Temperature of Poly(vinylidene Fluoride) on Crystal Modification and Phase Transition of Poly(butylene Adipate) in Their Blends: a Novel Approach for Polymorphic Control.

Method for preparing poly(p-phenylene terephthalamide)

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Thermal stability analysis of ethylene polymerization fluidized bed reactors under condensed mode operation through a TPM-PBM integrated model

Structural tuning of polycaprolactone based thermadapt shape memory polymer

3‐D numerical simulations for polycondensation of poly(p‐phenylene terephthalamide) in twin screw extruder

Numerical Simulation Of Reactive Extrusion For Polycondensation Of Poly(P-Phenylene Terephthalamide) (Ppta)

Non-aqueous Suspension Polycondensation in NMP-CaCl2/paraffin System — A New Approach for the Preparation of Poly(p-Phenylene Terephthalamide)

Preparation of Poly(P-Phenylene Terephthalamide) in A Microstructured Chemical System

Temperature rising elution fractionation of polypropylene produced by heterogeneous Ziegler-Natta catalysts

Reaction Mechanism of Terephthaloyl Chloride/N-Methyl-2-Pyrrolidone and the Effect on Poly(P-Phenylene Terephthalamide) Polymerization

Study on reaction kinetics of bio-based semi-aromatic high temperature polyamide PA10T/1010

Highly active Ziegler-Natta Catalysts for propylene polymerization (2) effects of Al/Ti ratio and polymerization temperature

Thermoregulated Phase Transfer Ligands and Catalysis IX.

Polymerization and Decomposition of Terephthaloyl Chloride and P-Phenylenediamine at 500 °C

Reaction Kinetics of Polycondensation Process of Low Molecular Weight Poly (ethylene adipate)