Abstract:A new acid absorbent of calcium hydride was used in the synthesis of high molecular weight poly(p-phenylene terephthalamide) (PPTA) and compared with the traditional acid absorbent of pyridine. Pyridine utilized as acid absorbent in terephthaloyl chloride and p-phenylenediamine condensation polymerization is helpful to get high molecular weight product, however, it is difficult to separate pyridine with other agents in further agent recycling process, which is unacceptable in PPTA industrial production. This work investigates the effect of calcium hydride replacing pyridine as acid absorbent on the PPTA synthesis process and the chemical structure of resulted PPTA. Multiple instrumental measurements such as element analysis, Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were carried out in the characterization of the yielded products. Inherent viscosity data showed that high molecular weight PPTA could be obtained with calcium hydride as acid absorbent. On the other hand, there existed an optimum addition amount of calcium hydride at which high molecular weight PPTA with inherent viscosity high over 6.5 could be obtained. Element analysis, infrared spectroscopy and XRD gave that no difference in element content, molecular structure and crystal structure could be recognized from the products using the two acid absorbents. TGA curves showed that the products using both acid absorbents degraded at approximately 550 degrees C. All the results demonstrate it is feasible to synthesize high molecular weight PPTA using calcium hydride as acid absorbent in large scale production of PPTA.

Effect of Liquid Nitrogen Addition on Synthesis of Poly(p-phenylene Terephthalamide)

Experimental studies on PPTA synthesized by low-temperature polycondensation in mixed solvent N-methyl pyrrolidone and Calcium Chloride

Exploring the Reaction Heat Controlling and Engineering Scale Law in the Process to Synthesis PPTA Using Low-Temperature Solution Polycondensation

Research on preparation of poly(1, 4-phenylene-terephthalamide) with in-situ phase transition aided heat transfer and its engineering scale study

Method for preparing poly(p-phenylene terephthalamide)

Effects of Crystallization Temperature of Poly(vinylidene Fluoride) on Crystal Modification and Phase Transition of Poly(butylene Adipate) in Their Blends: a Novel Approach for Polymorphic Control.

Liquid Crystalline Pet/60hba-Mwnts Composite: Synthesis, Characterization, and Properties

Reaction Mechanism of Terephthaloyl Chloride/N-Methyl-2-Pyrrolidone and the Effect on Poly(P-Phenylene Terephthalamide) Polymerization

Non-aqueous Suspension Polycondensation in NMP-CaCl2/paraffin System — A New Approach for the Preparation of Poly(p-Phenylene Terephthalamide)

Preparation of Poly(P-Phenylene Terephthalamide) in A Microstructured Chemical System

Influence of N,N,N′,N′-tetraalkyl terephthalamide on isothermal crystallization kinetics and morphology evolution of polypropylene

Additive Effects of N,N,N′,N′ -Tetraalkyl Terephthalamide on Crystalline Morphology and Mechanical Properties of Polypropylene

The Effect of Introducing B and N on Pyrolysis Process of High Ortho Novolac Resin

3‐D numerical simulations for polycondensation of poly(p‐phenylene terephthalamide) in twin screw extruder

Polymerization and Decomposition of Terephthaloyl Chloride and P-Phenylenediamine at 500 °C

Synthesis and Effect Ofn,n'-Diphenylterephthalamide on Crystallization of Isotactic Polypropylene

Numerical Simulation Of Reactive Extrusion For Polycondensation Of Poly(P-Phenylene Terephthalamide) (Ppta)

INVESTIGATION ON THE PREPARATION OF HIGH MOLECULAR WEIGHT POLY(p-PHENYLENE TEREPHTHALAMIDE) USING CaH_2 AS ACID ABSORBENT

Synthesis of Poly(trimethylene Terephthalate) with Enhanced Properties by Using a Novel Titanium Catalyst-Toner Combination

A new approach to the preparation of poly(p-phenylene terephthalamide) nanofibers

Thermal Decomposition Kinetics of Poly(trimethylene Terephthalate)