Abstract:Hot stamping of boron steels is a thermal-mechanical and phase transformation coupled process. The phase transformation of boron steels during continuous cooling is a complex process since the phase transformation is tightly coupled with plastic deformation during the hot stamping process. In the present work, the effects of hot deformation amount, deformation temperature, and strain rate on phase transformation are investigated by using a comprehensive set of methods including in-situ isothermal tensile tests combined with dilatometry and ex-situ microstructure characterization. The dilatation curves, phase fraction evolution curves, continuous cooling transformation (CCT), and deformed continuous cooling transformation (DCCT) diagrams are constructed. Finally, based on the testing results, a new non-isothermal kinetic model of phase transformation are proposed to introduce the effect of the austenite deformation on transformation during the continuous cooling. The proposed model is validated by testing Vickers hardness of DCCT specimens and hot stamping W-channel parts. The results demonstrate that the deformation accelerates the diffusive phase transformation, causing the CCT curves to move in the direction of shorter incubation time. But the acceleration of diffusion transformation is rapidly saturated as the plastic strain increases. Lower deformation temperature and higher strain rate are more favorable to the diffusion phase transformation, and the higher the critical cooling rate of the martensite transformation is needed. The proposed kinetic model not only accurately predicts the final phase fraction and hardness of the DCCT specimen, but also the distribution of mechanical properties of the hot stamping W-channel parts.

Thermal and Mechanical Characteristics of a HSLA Steel As Joint Partner for Hot Stamping Tailor Welded Boron Steel

Experimental Study on Thermodynamic Performance of Boron Steel B1500HS Used for Hot Stamping Process

Hot Stamping Processing Experiments of Quenchable Boron Steel

Fractional Cooling Strategy of the Hot-Stamping Process and Its Influence on Formability and Mechanical Properties of Ultra-High-Strength Steel Parts

Study on quenching & partitioning heat treatment for hot-stamped high-strength steel B1500HS

Hot Formation Quality of High Strength Steel BR1500HS for Hot Stamping Without Cooling System

Microstructural Evolution in Boron-Added Advanced High-Strength Steel Suitable for Hot Stamping

Research on One-Step Quenching and Partitioning Treatment and Its Application in Hot Stamping Process

Effect of Deformation on Microstructure and Properties of Hot Stamping Boron Steel B1500HS

Phase Transformation Testing and Modeling for Hot Stamping of Boron Steel Considering the Effect of the Prior Austenite Deformation

Numerical Simulation of Hot Stamping of Quenchable Boron Steel

Application of Hot Stamping Process by Integrating Quenching & Partitioning Heat Treatment to Improve Mechanical Properties

A Tailored Preparation Method of Variable Strength for Ultra-High-Strength Steel Sheet and Mapping Mechanism between Process and Property

Phase Transformation Simulation of High Strength Steel under Hot Stamping Process

Influence of Thermal Modification on Al-Si Coating of Hot-Stamped 22mnb5 Steel: Microstructure, Phase Transformation, and Mechanical Properties

Influence of hot forming on microstructure and mechanical properties of laser tailor-welded dissimilar ultra-high-strength steels

Hot Stamping Forming Processes and Experiments of 22mnb5 Ultra-high Strength Steels

Microstructure and Performance Evaluations on Q&P Hot Stamping Parts of Several UHSS Sheet Metals

Impact of various heat treatment processes and welding speeds on the mechanical properties and microstructures of soft/hard composite joints

Effect of hot/warm rolling on the microstructures and mechanical properties of medium-Mn steels

Investigation of the Hot-Stamping Process for Advanced High-Strength Steel Sheet by Numerical Simulation