Abstract:In large-scale welding processes involving complex geometries, variations in gap dimensions and the transition of filler wire form distinctive molten pool flow behaviors, significantly affecting weld formation and quality. This paper investigates the differences in the laser self-melting and wire-filling welding pool behavior of titanium alloy with variable gaps through both simulation and experimentation. An innovative three-dimensional transient heat-flow coupling model is developed to simulate laser welding with variable gap structures, incorporating the dynamics of the welding wire-filling process. The different laser welding modes and the filling process under the variable gap structure were numerically simulated. The results indicate that the maximum flow rate of the laser self-melting pool remains stable in proximity to the keyhole, reaching a maximum of approximately 2.491 m/s, with molten metal entering through the area surrounding the keyhole. As the gap size gradually increases to 0.2 mm during the laser self-fusion welding stage, keyhole instability becomes more pronounced. In transitioning from laser self-fusion to wire-filling welding, the welding wire behavior can be divided into three stages. The molten metal at the end of the welding wire is transferred to the liquid melt pool through a liquid metal bridge. The flow rate of this bridge initially rises before gradually decreasing, reaching a maximum flow rate of 1.606 m/s. Notably, the welding wire lags approximately 0.6 mm behind the laser's focal point, with the narrowest width of the liquid bridge measuring about 0.89 mm. Based on the simulation results and considering the melting transition time of the welding wire, the initiation time for the welding wire has been further adjusted to the first 10 ms when the gap threshold reaches 0.2 mm. Experimental verification confirms the successful laser welding of a 2 mm variable gap structure thin plate. This study elucidates the melt pool flow, keyhole fluctuations, and metal transition behaviors during the laser welding process, contributing to a deeper understanding of the complex heat and mass transfer dynamics inherent in variable gap structure laser self-melting and wire-filling welding. Ultimately, these insights aim to enhance the application of laser welding in adaptive welding for large structural components.

Temperature Gradient and Heat Conduction of Titanium Alloy during Laser Welding

Microstructural evolution and numerical simulation of laser-welded Ti2AlNb joints under different heat inputs

A Study on the Influences of Welding Position on the Keyhole and Molten Pool Behavior in Laser Welding of a Titanium Alloy

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Fluid Flow Characteristics and Porosity Behavior in Full Penetration Laser Welding of a Titanium Alloy

Numerical Simulation of Temperature Fields during Laser Welding–Brazing of Al/Ti Plates

Research on microstructure of Ti-6Al-4V titanium alloy by thermal simulation under water cooling

Numerical study of heat and mass transfer in dissimilar laser welding of Mg/Al lap-joint with Ti interlayer

Numerical Analysis of Effect of Welding Positions on Formation Quality During Laser Welding of Titanium Alloys

Numerical Simulation of Preheating Temperature on Molten Pool Dynamics in Laser Deep-Penetration Welding

Documenting weld pool behavior differences in variable-gap laser self-melting and wire-filling welding of titanium alloys

3d Multiphysical Modelling Of Fluid Dynamics And Mass Transfer In Laser Welding Of Dissimilar Materials

Coupled simulation of thermal-metallurgical-mechanical behavior in laser keyhole welding of AH36 steel

Study on keyhole characteristics and weld pool dynamics of Ti6Al4V alloy fabricated by continuous wave laser beam welding

Heat transfer and melt flow of keyhole, transition and conduction modes in laser beam oscillating welding

Investigation on keyhole stability and surface quality in laser welding of TC4 titanium alloy with adjustable ring-mode (ARM) laser

FEM-Based Conductive Heat Transfer Analytical Description of Solidification Rate and Temperature Gradient during Lateral Laser Beam Oscillation Welding of Aluminum Alloy

Modeling of Temperature Field and Pool Formation During Linear Laser Welding of DP1000 Steel

Multi-Component Evaporation and Uneven Aluminum Distribution during High-Power Vacuum Laser Welding of Ti-6Al-4V Titanium Alloy

Numerical Simulation on Temperature Field in Laser-Plasma Arc Hybrid Welding

Tailoring Weldability for Microstructures in Laser-Welded Near-α Titanium Alloy: Insights on Mechanical Properties