A study on modification of chemi-mechanical pulping property of wheat straw by pretreatment with ZnCl2aqueous solution
Rui ZHAI,Zhi-jun HU,Xue-jin ZHANG,Xiao-fan ZHOU
DOI: https://doi.org/10.3969/j.issn.1007-9211.2018.04.004
2018-01-01
Abstract:In this work, ZnCl2aqueous solution was used to treat wheat straw material to modify the chemi-mechanical pulping property. The effects of ZnCl2dosage, impregnation time, treating temperature, and treating time were evaluated by single-factor experiments. The analysis of FT-IR, XRD and SEM was applied to show the variations in micro-properties of the wheat straw and pulp fibers. The optimal conditions were determined as ZnCl2dosage of 8%, impregnation time of 15min, treating temperature of 70°C, and treating time of 60min. Compared with those of the bleached chemi-thermo-mechanical pulp, the refining energy of the bleached chemi-mechanical pulp by treatment of ZnCl2aqueous solution was decreased by 21.8%, the accept yield was increased by 4.6%, the whiteness was increased by 5.7%, tensile index was increased by 15.3%, burst index was increased by 18.6%, and the bulk was decreased by 2.9%. There were no significant variations in the analysis of FT-IR, XRD or the integral surface morphology of the wheat straw chips and pulps. However, there were a little more damages on the surface of the pulps prepared with pretreatment of ZnCl2aqueous solution.