Abstract:The mechanical and flame-retardant properties of sodium silicate-impregnated fast-growing poplar have been greatly improved by a wide variety of methods, which has solved the problem of insufficient supply of natural wood to a certain extent. However, sodium silicate is easily leached and has high hygroscopicity, and sodium silicate-modified poplar (SSMP) has low anti-shrink efficiency (ASE), which make it difficult to maintain its dimensional stability. Dimethylol dihydroxyethylene urea (DMDHEU) contains polyhydroxymethyl active groups that are highly reactive with wood fibers and sodium silicate. Therefore, in this study, sodium silicate and DMDHEU were used as a composite modifier to carry out vacuum-pressure-impregnation modification on fast-growing poplar to form a bridging structure. This treatment fixed the sodium silicate and improved the dimensional stability of poplar. Mechanical properties of poplar wood were improved by modifications with sodium silicate and DMDHEU. The dimensional stability was greatly improved, and the fixation of sodium silicate was improved. Compared with the SSMP, the leaching rate and ASE of SS/DDMP were reduced by 48.82% and 41.79%, respectively. XRD, FTIR, and XPS results showed that C–O–C and Si–O–C bonds were formed between DMDHEU and the wood cell walls and sodium silicate. These bonds closely bound the cellulose crystals, which reduced the number of –OH groups being accessible for water and, thus, the moisture absorption of SS/DDMP. In addition, due to the increase in crystallinity, the heat resistance was further enhanced. The cone calorimetry results showed that SS/DDMP had the lowest heat release rate and total heat release. Compared with SSMP, the mean smoke release rate (mean SPR) and total smoke release decreased by 40.38% and 40.83%, respectively. Moreover, the release of CO and CO 2 decreased. In conclusion, compared with other modification methods, the use of SS/DD impregnation to modify poplar has the potential to produce good overall performance of poplar with high-dimensional stability, flame retardancy, and smoke suppression.

Chemical modification of poplar wood featuring compressible rebound 3D structure as water treatment absorbents

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

Study on the Effect of Acrylic Acid Emulsion on the Properties of Poplar Wood Modified by Sodium Silicate Impregnation

Delayed Elastic Strain and Set-Recovery Evaluation in High-Pressure Densified Hybrid Poplar Wood – New Assessment Considerations

High-pressure Densification and Hydrophobic Coating for Enhancing the Mechanical Properties and Dimensional Stability of Soft Poplar Wood Boards

Effects of High-Pressure Treatment on Poplar Wood: Density Profile, Mechanical Properties, Strength Potential Index, and Microstructure

Modification Mechanisms and Properties of Poplar Wood via Grafting with 2-Hydroxyethyl Methacrylate/N,N'-methylenebis(acrylamide) onto Cell Walls

Manufacturing and Characterization of Modified Wood with In Situ Polymerization and Cross-linking of Water-Soluble Monomers on Wood Cell Walls

Preparation and properties of modified poplar impregnated with PVA-nano silica sol composite dispersion system

Development of super dimensional stable poplar structure with fire and mildew resistance by delignification/densification of wood with highly aligned cellulose molecules

Preparation of highly-densified modified poplar wood by evacuating the micro-pores of wood through a gas expansion method

Integrated approach for improving mechanical and high-temperature properties of fast-growing poplar wood using lignin-controlled treatment combined with densification

Characterization of Microstructure, Chemical, and Physical Properties of Delignified and Densified Poplar Wood

Mechanical Properties and Dimensional Stability of Poplar Wood Modified by Pre-Compression and Post-Vacuum-Thermo Treatments

Building bridging structures and crystallization reinforcement in sodium silicate-modified poplar by dimethylol dihydroxyethylene urea

Research on the Impregnation Process and Mechanism of Silica Sol/Phenolic Resin Modified Poplar Wood

Preparation Optimization of Enhanced Poplar Wood by Organic–Inorganic Hybrid Treatment via Response Surface Methodology

Developing poplar wood into a green structure-decoration integrated material for prefabricated wooden building application

Study of Mechanical Performance and Gluability of Modified Fast-growing Poplar Wood

Effect of Modification with ACQ-D on Mechanical and Sorption Isotherm Performance of Fast-Growing Poplar Wood

Modification with carboxymethylation-activated alkali lignin/glutaraldehyde hybrid modifier to improve physical and mechanical properties of fast-growing wood