Abstract:Novel Cyanoguanidine-modified chitosan (CCs) adsorbent was successfully prepared via a four-step procedure; first by protection of the amino groups of chitosan, second by insertion of epoxide rings, third by opening the latter with cyanoguanidine, and fourth by restoring the amino groups through elimination of the protection. Its structure and morphology were checked using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The adsorption capacity of CCs for Congo Red (CR) dye was studied under various conditions. It decreased significantly with the increase in the solution pH value and dye concentration, while it increased with increasing temperature. The adsorption fitted to the pseudo-second order kinetic model and Elovich model. The intraparticle diffusion model showed that the adsorption involved a multi-step process. The isotherm of CR dye adsorption by CCs conforms to the Langmuir isotherm model, indicating the monolayer nature of adsorption. The maximum monolayer coverage capacity, qmax, was 666.67 mg g−1. Studying the thermodynamic showed that the adsorption was endothermic as illustrated from the positive value of enthalpy (34.49 kJ mol−1). According to the values of ΔG°, the adsorption process was spontaneous at all selected temperatures. The value of ΔS° showed an increase in randomness for the adsorption process. The value of activation energy was 2.47 kJ mol−1. The desorption percentage reached to 58% after 5 cycles. This proved that CCs is an efficient and a promising adsorbent for the removal of CR dye from its aqueous solution.

Adsorption of Congo Red from Aqueous Solution onto Chitosan/Rectorite Composite

Adsorption of Acid Red Onto Chitosan/rectorite Composites from Aqueous Solution

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Preparation of Chitin with Different Degrees of Deacetylation from Crab Shells Waste and Its Application in the Removal of Congo Red

Adsorption Characteristics of Congo Red Onto the Chitosan/montmorillonite Nanocomposite.

Adsorption Properties of Congo Red from Aqueous Solution Onto N,O-carboxymethyl-chitosan

Efficient adsorption of Congo red by MIL-53(Fe)/chitosan composite hydrogel spheres

Congo red adsorption on shell powder and chitosan-coated shell powder biosorbents: experiments and theoretical calculation

Removal of Congo Red from Aqueous Solution Using A Chitosan/Organo-Montmorillonite Nanocomposite

Enhanced Adsorption of Congo Red Using Chitin Suspension after Sonoenzymolysis.

The effective removal of Congo red dye via chitosan-layered double hydroxide composite and the deep insight into mechanism

Efficient adsorption of azo anionic dye Congo Red by micro-nano metal-organic framework MIL-68(Fe) and MIL-68(Fe)/chitosan composite sponge: Preparation, characterization and adsorption performance

Kinetics, Isotherm and Thermodynamic Studies for Efficient Adsorption of Congo Red Dye from Aqueous Solution onto Novel Cyanoguanidine-Modified Chitosan Adsorbent

Adsorption behaviors of Congo red on the N,O-carboxymethyl-chitosan/montmorillonite nanocomposite

Adsorption of Congo Red from Aqueous Solution Onto Shrimp Shell Powder

Adsorption of Acid Red R Onto Chitosan Grafted with Β-Cyclodextrin

Preparation of Chitosan/Montmorillonite Nanocomposites and Theirs Adsorption Properties for Congo Red Dye

Design, Synthesis and Adsorption Evaluation of Bio-Based Lignin/Chitosan Beads for Congo Red Removal

CRAB SHELL: A POTENTIAL HIGH-EFFICIENCY AND LOW-COST ADSORBENT FOR DYE WASTEWATER

Adsorption of Acid Red by Porous Chitosan Film

Adsorption of congo red onto lignocellulose/montmorillonite nanocomposite