Abstract:Novel Cyanoguanidine-modified chitosan (CCs) adsorbent was successfully prepared via a four-step procedure; first by protection of the amino groups of chitosan, second by insertion of epoxide rings, third by opening the latter with cyanoguanidine, and fourth by restoring the amino groups through elimination of the protection. Its structure and morphology were checked using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The adsorption capacity of CCs for Congo Red (CR) dye was studied under various conditions. It decreased significantly with the increase in the solution pH value and dye concentration, while it increased with increasing temperature. The adsorption fitted to the pseudo-second order kinetic model and Elovich model. The intraparticle diffusion model showed that the adsorption involved a multi-step process. The isotherm of CR dye adsorption by CCs conforms to the Langmuir isotherm model, indicating the monolayer nature of adsorption. The maximum monolayer coverage capacity, qmax, was 666.67 mg g−1. Studying the thermodynamic showed that the adsorption was endothermic as illustrated from the positive value of enthalpy (34.49 kJ mol−1). According to the values of ΔG°, the adsorption process was spontaneous at all selected temperatures. The value of ΔS° showed an increase in randomness for the adsorption process. The value of activation energy was 2.47 kJ mol−1. The desorption percentage reached to 58% after 5 cycles. This proved that CCs is an efficient and a promising adsorbent for the removal of CR dye from its aqueous solution.

Adsorption of Acid Red by Porous Chitosan Film

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Study on adsorption of azo dye Acid Red B onto cross-linked chitosan

Adsorption of Acid Red Onto Chitosan/rectorite Composites from Aqueous Solution

Preparation of Chitin with Different Degrees of Deacetylation from Crab Shells Waste and Its Application in the Removal of Congo Red

Acid Dye Adsorption Properties of Ethylenediamine-Modified Magnetic Chitosan Nanoparticles

Adsorption of Acid Dyes from Aqueous Solutions by the Ethylenediamine-Modified Magnetic Chitosan Nanoparticles.

Adsorption of Congo Red from Aqueous Solution onto Chitosan/Rectorite Composite

Adsorption of Acid Red R Onto Chitosan Grafted with Β-Cyclodextrin

A Comparative Study of Removal of Acid Red 27 by Adsorption on Four Different Chitosan Morphologies

Enhanced Adsorption of Congo Red Using Chitin Suspension after Sonoenzymolysis.

Congo red adsorption on shell powder and chitosan-coated shell powder biosorbents: experiments and theoretical calculation

Adsorption of Congo Red from Aqueous Solution Onto Shrimp Shell Powder

Characterization of Sn-MOF and its adsorption application for Acid Red 3R

Intraparticle diffusion processes during acid dye adsorption onto chitosan

CRAB SHELL: A POTENTIAL HIGH-EFFICIENCY AND LOW-COST ADSORBENT FOR DYE WASTEWATER

Effects of Adsorption Interferents on Removal of Reactive Red 195 Dye in Wastewater by Chitosan.

Design, Synthesis and Adsorption Evaluation of Bio-Based Lignin/Chitosan Beads for Congo Red Removal

Effect of Beading Parameters on Cross-Linked Chitosan Adsorptive Properties

Kinetics, Isotherm and Thermodynamic Studies for Efficient Adsorption of Congo Red Dye from Aqueous Solution onto Novel Cyanoguanidine-Modified Chitosan Adsorbent

Preparation of Modified Chitosan Microspheres and their Anionic Dye Adsorption Behaviors