Abstract:It is known that Ni-based superalloys possess superior mechanical properties in high-temperature and high-pressure environments. One of the drawbacks of these alloys is their tendency to oxidize at high temperatures. Improving their oxidation properties and obtaining a fundamental understanding of the underlying mechanism of their oxidation behavior are critical for high temperature applications. In this work, we manufactured IN792 Ni-based alloys with two different grain sizes to examine the effect of grain size on oxidation behavior at 850 o C and 980 o C. The oxidation rate became faster as the grain size became finer, and at 850 o C, the oxide layer was composed of external oxides (TiO 2 /NiO, Ni-Co-Cr-O, Cr 2 O 3 ), internal oxides (TiTaO 4 , non-oxidized layer, Al 2 O 3 ) and a precipitate-free zone (PFZ). At 980 o C, this structure became unstable due to the diffusion of Ni, and in particular, a lot of exfoliation of external oxides occurred in the coarse grain. Regardless of the structure of the oxide layers, the thickness of the PFZ increased significantly in the fine grains with a low  fraction. Compared to the hardness of external Cr-rich oxides of ~500 HV, the hardnesses of the internal oxides consisting of Al-rich and Ni-Al-O were approximately 1000 HV and 1500 HV, respectively. Therefore, the most vulnerable position is expected to be the interfacial boundary between the external oxide and internal oxide, and this resulted in the ease of exfoliation of the external oxide in this location, by exposing the Ni-Al-O oxide to the surface in the coarse grain at 980 o C. The current work can be a useful method in the design of Ni-based superalloys by controlling the grain size of the components.

A Study on the Oxidation Behavior of Nickel Coatings with Different Grain Sizes and Preferred Orientations

Oxidation Behaviour of Sputter-Depositedni–cr–al Micro-Crystalline Coatings

Effect of Grain Size on High Temperature Oxidation Behavior of IN792 Superalloy

Effect of electrodeposition temperature on grain orientation and corrosion resistance of nanocrystalline pure nickel

Effect of Process Control Agent on Microstructures and High-Temperature Oxidation Behavior of a Nickel-Based ODS Alloy

Effect of Grain Size on Oxidation Behavior of Fe-40ni-15cr Alloys

Anisothermal Oxidation of Micro-crystalline: Ni-20Cr-5AI Alloy Coatings

On the high-temperature oxidation behavior of a niobium-bearing high nickel-chromium alloy: microstructural evolution and implications on oxidation mechanisms

Oxidation Behavior of Graded NiCrAlYRe Coatings at 900, 1000 and 1100 °C

Anisothermal Oxidation of Micro-Crystalline Ni-20Cr-5Al Alloy Coating at 850-1280°C

Microstructural evolution during exposure in air and oxidation behavior of a nickel-based superalloy

Oxidation behavior of a nickel-based single crystal superalloy at 1100 °C under different oxygen concentration

The Effect of Crystallographic Orientation on the Oxidation Behavior of a Single-Crystal Nickel-Base Superalloy

On the preferential grain boundary oxidation of a Ni-Co-based superalloy

Oxidation of Nickel-Coated AISI 430 Alloy: Effect of Pre-oxidation and Fe0.5Ni0.5 Inter-diffusion Layer

Study of Oxidation Behavior of Nanostructured Nicraly Bond Coatings Deposited by Cold Spraying

Oxidation Behavior Of Graded Nicralyre Coatings At 900, 1000 And 1100 A Degrees C

Characterization of isothermal oxidation of air plasma sprayed NiCrAlY coatings

Grain size effect in corrosion behavior of electrodeposited nanocrystalline Ni coatings in alkaline solution

Comprehensive study on the microstructure evolution and oxidation resistance performance of NiCoCrAlYTa coating during isothermal oxidation at High temperature

Effect of Grain Size on the Oxidation of Fe–13Cr–5Ni Alloy at 973K in Ar–21vol%O2