Selective and Efficient Extraction of Cu(II) from a Complex Sulfate Solution Containing Co(II), Fe(II), Cu(II), and Zn(II) Using DZ988N
Jing He,Shu-qiong Cao,Yong-ming Chen,Tao Liu,Yun Li,Fang-wen Liao,Jie Dai,Ya-fei Jie
DOI: https://doi.org/10.1007/s11771-022-5012-y
2023-01-01
Journal of Central South University
Abstract:DZ988N, a kind of chelating extractant, was used to separate copper from the sulfuric acid leaching solution of a polymetallic residue containing Co(II), Fe(II), Cu(II) and Zn(II), and its chelating mechanism was investigated. In order to optimize the DZ988N extraction process, the effects of DZ988N concentration ( v/v ), pH value of aqueous phase, extraction temperature, time and phase volume ratio (O/A) on metal extraction efficiency ( η M ) and separation coefficient ( β A/B ), were determined in detail. It was found that, under the optimal extraction conditions of DZ988N concentration ( v/v ) of 25%, pH value of aqueous phase of 2.0, extraction temperature of 25 °C, time of 6 min, and phase volume ratio (O/A) of 1/1.5, the single-stage extraction efficiency of Cu(II) was 97.53%, while Fe(II), Co(II) and Zn(II) were basically remained. In addition, extraction isotherms diagram (McCabe-Thiele diagram) was built to determine that a two-stage counter-current extraction is needed. Under the optimal conditions, the copper extraction efficiency was 99.92% and stripped rate was 99.2%. Finally, 99.63% Cu was enriched into the stripped solution with 7.85 g/L Cu 2+ , and 0.38% was lost.