Abstract:The coupling effect of wear and corrosion aggravates the damage and failure of key moving parts of high-end equipment, leading to a significant reduction in their service life. In present work, a functional integrated composite coating with exceptional corrosion resistance and tribological properties was developed by utilizing the responsive corrosion inhibition of nano‑cerium oxide (nano-CeO2) and the low surface energy and low shear characteristics of polytetrafluoroethylene (PTFE). The tribological behaviors and corrosion protection performance of coatings on aluminum alloy 2024 were evaluated and the corrosion inhibition mechanism was further discussed. The results revealed that Ce3+ on the surface of nano-CeO2 reacts with OH− generated by the REDOX reaction of the cathode to produce a uniform and stable passivation film, which can effectively improve the corrosion resistance of the metal matrix. Notably, the most obvious passivation effect is presented when the 2 % addition of nano-CeO2 as the larger low-frequency impedance modulus of 4.49 × 1010 Ω·cm2 and higher phase angle of 88°. The introduction of PTFE not only changes the coating from hydrophilic to hydrophobic, but also further improves the shielding properties of the coating. The low-frequency impedance modulus of the coating further increases by an order of magnitude to 2.38 × 1011 Ω·cm2, and its neutral salt spray resistance exceeds 210 days. Besides, the friction coefficient is reduced by 77.43 % and the wear resistance improved by 6.8 times compared with phenolic epoxy coating. Due to the enhancement and corrosion inhibition effect of nano-CeO2, the lower friction coefficient (0.044) and good wear resistance are further presented under the corrosive medium condition of 3.5 % NaCl solution.

Self-Lubricating Sic/Ptfe Composite Coating Formation on Surface of Aluminium Alloy

Synthesis of Anodizing Composite Films Containing Superfine Al2O3 and PTFE Particles on Al Alloys

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Self-Lubricating Al2o3/Ptfe Composite Coating Formation on Surface of Aluminium Alloy

Enhanced tribological behavior of anodic films containing SiC and PTFE nanoparticles on Ti6Al4V alloy

Microstructure and Abrasive Wear Behaviour of Anodizing Composite Films Containing Sic Nanoparticles on Ti6al4v Alloy

Enhanced Mechanical and Tribological Capabilities of a Silicon Aluminum Alloy with an Electroplated Ni–Co–P/Si3N4 Composite Coating

Study on Anodic Oxidation Process and Property of Composite Film Formed on Ti–10V–2Fe–3Al Alloy in SiC Nanoparticle Suspension

Tribological properties of PEEK-based composite coating prepared by thermal spraying

Study of fabrication and wear properties of Ni–SiC composite coatings on A356 aluminum alloy

Lubrication, wear resistance and corrosion protection on aluminum alloy toward multifunctional coatings with nano-CeO2 inhibition effect

Electrophoretic Deposition of Ptfe Particles on Porous Anodic Aluminum Oxide Film and Its Tribological Properties

Hydrophobicity and tribological properties of Al 2 O 3 /PTFE composite coating

Influence of Surface Microstructure on Tribological Properties of PEO-PTFE Coating Formed on Aluminum Alloy

Hydrophobicity and tribological properties of Al<sub>2</sub>O<sub>3</sub>/PTFE composite coating

Influence of Anodizing Time on Morphology, Structure and Tribological Properties of Composite Anodic Films on Titanium Alloy

Analysis and self-lubricating treatment of porous anodic alumina film formed in a compound solution

Polydimethylsiloxane-titania nanocomposite coating: Fabrication and corrosion resistance

Effect of SiC Nanoparticle Concentration on the Properties of Oxide Films Formed on Ti–10V–2Fe–3Al Alloy

Self-lubricative Coating Grown by Micro-Plasma Oxidation on Aluminum Alloys in the Solution of Aluminate–graphite

Dry Sliding Wear And Static Immersion Corrosion Resistance of Aluminum Alloy 6061-T6/SiCp Metal Matrix Composite Prepared Via Friction Stir Processing