Abstract:Lean-burn natural-gas spark-ignition combustion inside a diesel geometry is characterized by two distinct and successive events: a rapid burning process inside the piston bowl, followed by a much slower burn inside the squish region. This paper used experimental data (including images of flame natural luminosity) to investigate the magnitude and phasing of these two combustion stages. The results showed a substantial impact on the parameters generally used to investigate the combustion phenomena in spark-ignition engines (e.g., the 10-to-90-percent energy release). A better solution to identify the start and end of the rapid- and the slow-burning stages in such an engine is to use the inflection points in the apparent rate of heat release. Moreover, as the higher turbulence in a diesel-like environment accelerates flame inception, the 5% or 10% energy release used traditionally to define the flame inception period should not be used for these engines because the enflamed zone already reached an appreciable size at the two corresponding crank angle degrees. Further, the 2nd inflection point in the apparent rate of heat release (i.e., the point where the slow-burning stage started to dominate the heat release) was much advanced compared to 90% energy release generally used to define the end of the rapid-burning stage in conventional stoichiometric spark-ignition engines. Furthermore, as the slow-burning stage was characterized by a lower flame propagation speed, a lower fuel fraction burning during this stage would increase the engine combustion efficiency. Furthermore, a more advanced phasing of the late-burning stage relative to the fast-burn stage would result in a more optimal combustion environment (i.e., higher in-cylinder pressure and temperature), which would further improve the engine efficiency and probably reduce carbon monoxide and unburned hydrocarbon emissions. As a result, this study suggests that the combustion strategy of such converted diesel engines should advance and optimize the mass of fuel that burns inside the squish region.

Research on the Combustion and Emission Characteristics of Lean Burn CNG Engine

Numerical Investigation of Methane Number and Wobbe Index Effects in Lean-Burn Natural Gas Spark-Ignition Combustion

Optical and Numerical Investigations of Flame Propagation in a Heavy Duty Spark Ignited Natural Gas Engine

Impact of Excess Air Ratio and Ignition Timing on CNG Engine Emissions

Emission Characteristic of Turbocharged Lean Burn CNG Engine

An Experimental Study on Lean Burn Limits and Emission Characteristics of an Engine Fuelled with CNG/hydrogen Blends

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Investigation of Multistage Combustion Inside a Heavy-Duty Natural-Gas Spark-Ignition Engine Using Three-Dimensional Computational Fluid Dynamics Simulations and the Wiebe-Function Combustion Model

Combustion and Emission Characteristics of an Electronically-Controlled Common-Rail Dual-Fuel Engine

Effects of Natural Gas Composition and Compression Ratio on the Thermodynamic and Combustion Characteristics of a Heavy-Duty Lean-Burn SI Engine Fueled with Liquefied Natural Gas

Influences of the Control Parameters and Spark Plug Configurations on the Performance of a Natural Gas Spark-Ignition Engine

Experimental Study on Combustion and Emission Characteristics of a Hydrogen-Enriched Compressed Natural Gas Engine under Idling Condition

Analysis of Two-Stage Natural-Gas Lean Combustion Inside a Diesel Geometry

The Synergy Effect of Ignition Energy and Spark Plug Gap on Methane Lean Combustion with Addressing Initial Flame Formation and Cyclic Variation

Experimental Study of Combustion Strategy for Jet Ignition on a Natural Gas Engine

The Effect Of Excess Air Ratio On Performance Of Internal Combustion Engine At Idle Conditions For Different H-2/Cng Ratios

Influence of Different Volume Percent Hydrogen/Natural Gas Mixtures on Idle Performance of A Cng Engine

Experimental Study on Thermal Efficiency and Emission Characteristics of a Lean Burn Hydrogen Enriched Natural Gas Engine

Performance and Emission Characteristics of a Turbocharged CNG Engine Fueled by Hydrogen-Enriched Compressed Natural Gas with High Hydrogen Ratio

Effects of Hydrogen Addition on Cycle-By-Cycle Variations in A Lean Burn Natural Gas Spark-Ignition Engine

Influence of Mixture Gas Conditions on the Laminar Combustion Characteristics of Natural Gas