Abstract:The ordered mesoporous carbon-silica-alumina nanocomposites (MCSAs) with different ratios of Si/Al (10, 20 and 100) were synthesized by a multi-component co-assembly method followed by pyrolysis at high temperatures. The Si/Al ratio has an important effect on the acidic characteristics of the nanocomposite. The pyridine FT-IR results show that the nanocomposite with a Si/Al ratio of 100 has maximum amount of Brønsted acid sites. This may be because more non-framework Al-O-Si species are generated in the MCSA samples with lower Si/Al ratio due to the dealumination of the precursor in an acidic media during the surfactant-based assembly procedure and/or partial dealumination occurring during high temperature calcination. The copper-modified MCSAs were prepared by incipient wetness impregnation followed by calcination. The desulfurization performance of the as-prepared adsorbents was evaluated by the selective adsorption of dibenzothiophene (DBT) as a model sulfur compound from model fuels at ambient conditions. The dispersion extent of copper species increases with the increase of Brønsted acid sites, which results in a higher selectivity for DBT in competition with benzene. Compared with our previously prepared ordered mesoporous carbon-silica nanocomposite (MCS), the promotion effect of aluminum incorporation on the desulfurization selectivity is demonstrated. Moreover, the ordered mesoporous carbon-alumina nanocomposite (MCA) was also prepared. Its ordered mesostructure partially collapsed and the micropore volume is increased after copper incorporation, resulting in a good enhancement in sulfur capacity and selectivity.

Preparation Cu-Doped Carbon Aerogels and Their Adsorptive Desulfurization Performance

Enhanced desulfurization performance of copper aerogel-based absorbents

Cu Nanoparticles Inlaid Mesoporous Carbon Aerogels as a High Performance Desulfurizer.

Promoting Effect of Surface Acidities on Efficiency of Copper Modifier for Ordered Mesoporous Carbon-Sio2-Al2o3 Nanocomposites in Adsorptive Desulfurization

High‐performance adsorptive desulfurization by ternary hybrid boron carbon nitride aerogel

Preparation of micro-convex rough interface carbon aerogels with cellulose-lithium bromide (LiBr) molten salt hydrate gelled system and application of oil-water separation

Preparation of Carbon Aerogel Electrode for Electrosorption of Copper Ions in Aqueous Solution

Preparation of High Performance Adsorbents by Functionalizing Mesostructured Silica Spheres for Selective Adsorption of Organosulfur Compounds

Preparation and Microstructure of CuO-CoO-MnO/SiO2 Nanocomposite Aerogels and Xerogels As Catalyst Carriers

Preparation and Characterization of Cuo-Coo-Mno/Sio2 Nanocomposite Aerogels As Catalyst Carriers

A Comparative Study of Supercritical Petroleum Ether and Carbon Dioxide Drying in the Preparation of Carbon Aerogels

Fabrication of a CO2-responsive Chitosan Aerogel As an Effective Adsorbent for the Adsorption and Desorption of Heavy Metal Ions

Cobalt Sulfide Aerogel Prepared by Anion Exchange Method with Enhanced Pseudocapacitive and Water Oxidation Performances.

Multi-functionalized carbon aerogels derived from chitosan

Preparation of Cu/AC Catalyst and Its Application for Desulfurization

Enhanced Adsorption Selectivity of Dibenzothiophene on Ordered Mesoporous Carbon-Silica Nanocomposites Via Copper Modification

Preparation of Porous Carbon Materials Derived from Hyper-Cross-Linked Asphalt/Coal Tar and Their High Desulfurization Performance

Ag-Cu aerogel for electrochemical CO2 conversion to CO

CTAB-controlled synthesis of phenolic resin-based nanofiber aerogels for highly efficient and reversible SO2 capture

Flexible fabrication chitosan-polyamidoamine aerogels by one-step method for efficient adsorption and separation of anionic dyes

Carbon aerogels in the form of microspheres and their potential application in CO2 adsorption: A thermodynamic and kinetic study